M2 1997-02 BUELL S1, M2, XB9R, XB12R, LIGHTNING, THUNDERBOLT, RACE, FAIRING, FAIRINGS, BODYWORK

All Prices are listed at the bottom of the page

	The Buell M2 Cyclone is a sweet ride. Cramming a stonkin' V-twin in a nimble chassis is a recipe for good times. Not only do we make replacement fairings for the M2, we've also designed a performance airbox and an oil containment bellypan for all you track guys. We didn't stop there though, 'cause this bike has just about the perfect attitude for a streetfighter conversion, so we whipped up a really cool solo tail, dubbed the Manta, and fit our Rogue dual headlight fairing. Check it out...
	Click here for our M2 streetfighter kit
	BM21 Buell M2 Cyclone Fly screen This is a bikini fairing used on Buell M2’s, X1’s, and glass. This fly screen has the bulge in the center for the center gage cluster. This is a direct replacement and our carbon fiber piece is very popular. Call our sales reps for prices today! Price
	BM22 Buell M2 Cyclone Tail section This is a direct replacement for the M2 rear tail section. Simply drill the mounting holes and mount this onto your chassis. Replace your crash damaged body work or lighten your Buell up a little bit with our Air-Tech tail. Call us today! Price
	BM25 Buell M2 Cyclone Rear fender This is the rear fender that mounts onto cast aluminum swing arm on the M2’s. This piece is sold in fiberglass but is real popular in carbon fiber as well. Give our sales reps a call today for a price in carbon fiber. Price
	BM26 Buell M2 Cyclone Sprocket cover This is an Air-Tech design sprocket cover for the sportster motor Buells. This cover actually covers the contours of the can cover on the sportster motor and looks way cool. It looks a lot better than the stock Buell plastic crap. This piece is available in fiberglass and carbon fiber. Call our sales reps today! Price
	BM27 Buell M2 Cyclone Heat shield This is the heat shield mounted on the right hand side of the frame on the Buell M2’s. This keeps the heat from the exhaust and cylinder from cooking the riders’ leg. Your stock fiberglass piece is probably brittle and broken from heat cycles over the age and mileage. Replace that heat guard with our fiberglass piece or replace it with our carbon fiber unit. Price
	BM29 Buell M2 Cyclone Front fender This is the front fender that mounts onto the conventional forks on the Buell M2's. Price
	BOCP1 Buell M2 Cyclone Belly pan This is an oil containment belly pan for the Buell tube chassis bikes. Most racing organizations require oil containment and this belly pan is race legal for most race organizations. Some fabrication and brackets required. Price
	BS1AB Buell M2 Cyclone Air box This is a custom Air-Tech design air box for the chassis Buells. This sleek design screws directly onto the carburetor assembly, has a usable uni-filter, and an air filter cover that screws onto the back of the plate. This is a complete kit and just requires some drilling and mounting, we also recommend rejetting the carb since this air box flows considerably more air than the stock breadbox does. Increase your performance and increase your look. Get one of these air boxes today! Price

GP Kit
	If you're looking for a super aerodynamic fairing for your M2, Airtech has what you need! We have designed beautiful bodywork fit for a Grand Prix race bike! Not only does this bodywork look fast but also we are confident that this GP bodywork will produce impressive landspeed records at the Bonneville. Price
	BS1GP1 Buell M2 GP fairing kit This sleek aerodynamic two-piece front fairing assembly features a front air intake duct that pressurizes the air box assembly. The radiuses around the front leading edge of the fairing are aerodynamic and the lower belly pan will catch all of the Harley fluids. Also included is the teardrop 'aero' seat. This seat is guaranteed to close the envelope behind the rider. It has a complete filled in anti-draft shield underneath the seat and utilizes the stock S1 seat pan, S1 turning signals and S1 lights for those who wish to run on the street. This tail section will not work with a Corbin seat. This kit was originally designed for the S1, but will fit the S2 and S3 with some modifications: - You will have to cut (shorten) the subframe to fit the tail section. - Our main fairing stay will have to be modified to fit the mounting lugs on the steering head. - You need an S1 seat and S1/M2 taillight. This kit includes: - upper fairing - lower fairing - windscreen - mounting brackets - tail section - undertail Price
	BS1GP2 Buell M2 - GP tail section only The GP tail section is sold seperately. It utilizes stock S1 upholstery. This tail section will not work with a Corbin seat. This kit was originally designed for the S1. It will fit the M2, but you need an S1 seat. Price
	BS1GP3 Buell M2 Air box This is an air box assembly that works with our Buell GP fairing kit. The backing plate bolts onto the caburator assembly, and the fairing assembly holds the air filter in place. A three-inch round duct hose extends forward to the air duct in the front of the fairing assembly. Get nice, cool, pressurized air into the caburator assembly. A must if you are racing a tube chassis Buell with a Grand Prix fairing assembly. Price

Superbike Kit

How would you like to make your M2 look long, thin and fast? No Problem, Airtech has made your dreams come true. Grafted from the factory Harley VR1000 Superbike bodywork, this sleek bodywork will turn your Buell M2 in your dream machine. One of the unique features to this one piece fairing assembly includes air ducts that pressurize the air box assembly to increase the top end speed. This one-piece frame mounted fairing comes with brackets and windscreen. So if you are tired of your M2 looking like your friends, give Airtech a call, we can help you out.

This kit includes:
- upper fairing
- windscreen
- mounting brackets
- tail section
- undertail

BS1SB1
Buell M2 Super bike fairing kit
If you want to dress up your naked Buell this fairing assembly is what you want. This fairing is not as full coverage as our Grand Prix fairing unit, this assembly exposes a little bit of the motor out of the bottom. The fairing design was originated from the factory Harley Davidson VR1000 road race bikes. Although you may not be able to afford a VR1000 you can sure make your Buell look like one. Give our sales reps a call today!

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1, but will fit the M2 with some modifications:
- Our main fairing stay will have to be modified to fit the mounting lugs on the steering head.
- You need an S1 seat.

Price

BS1SB2
Buell M2 Super bike race tail
This is the race tail assembly out of our super bike fairing kit. This seat bolts onto the tube chassis Buells and uses stock S1 upholstery. This piece also comes with and under seat enclosure.

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1. It will fit the M2, but you need an S1 seat.

Price

Streetfighter - Manta

The M2 just begs for a fighter conversion, it's already got the stance and the attitude. You bring the bodywork!

ROGUEF1
Buell M2 'Rogue' fairing
This is an extremely cool street fighter style of fairing assembly for your Buell motorcycles. Simply take off that huge headlight and little bikini fairing and mount on our cool, new design that has duel projector beam lights. This is a bitchin' little fairing to mount on your street fighter. Get yours today!

Kit contains:
- fairing
- 2 headlights
- headlight bucket
- windscreen
- mounting hardware

Price

MANTA4
Buell M2 'Manta' tail section
Just go ahead and admire how much smaller and sleeker this tail section is than the bulky looking stock seat. We also did a matching slick undertail with a license plate mount.

That's right, this is by far the most sexy tail available for the M2.

And no, you won't be sitting on skimpy racing foam, we actually went through the trouble of designing a beautiful molded seat pad. What are you waiting for? Get one today!

Price

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
BUELL M2 CYCLONE 1997-02
BM21	BUELL M2 CYCLONE REPLACEMENT FAIRING 1/4	$83.37
BM22	BUELL M2 CYCLONE TAIL SECTION - SUPERSPORT	$159.08
BM25	BUELL M2 CYCLONE FENDER - REAR SWING ARM	$83.37
BM26	BUELL M2 CYCLONE SPROCKET COVER	$62.25
BM27	BUELL M2 CYCLONE REAR HEAD HEAT GUARD	$62.25
BM29	BUELL M2 CYCLONE FENDER - FRONT	$62.25
BM210	BUELL M2 CYCLONE LOWER REAR BELT GARD	$47.52
BS1AB	BUELL M2 CYCLONE AIR BOX - CUSTOM AIR TECH DESIGN	$156.45
BOCP1	BUELL M2 CYCLONE OIL CATCH PAN FITS S1/S2/S3/M2	$131.00
SUPERBIKE
BS1SB1	BUELL S1 LIGHTNING KIT - SUPERBIKE CONVERSION WITH SUPERSPORT TAIL SECTION	$729.75
BS1SB2	BUELL S1 LIGHTNING TAIL SECTION - SUPERBIKE CONVERSION	$246.75
BS1SB3	BUELL S1 LIGHTNING AIR BOX KIT - SUPERBIKE CONVERSION	$156.45
GP
BS1GP1	BUELL S1 LIGHTNING KIT - GP CONVERSION	$939.75
BS1GP2	BUELL S1 LIGHTNING TAIL SECTION - GP CONVERSION	$246.75
BS1GP3	BUELL S1 LIGHTNING AIR BOX KIT - GP CONVERSION	$156.45
STREETFIGHTER
ROGUEF1	BUELL M2 CYCLONE "ROGUE" BICLOPS FAIRING KIT	$318.14
MANTA4	BUELL M2 CYCLONE "MANTA" TAIL SECTION	$329.00

To order call 760-598-3366 NOW!