RR1000 RR1200 1985-'88

All Prices are listed at the bottom of the page


Buell RR1000

Erik Buell started his engineering career at Harley Davidson, but left H-D to pursue an opportunity to market Buell Motor Company 750cc two stroke racebikes to privateer teams competing in the AMA Formula 1 series. The race bike stint was short lived, as the AMA discontinued the series in favor of Superbike less than a season later.

Buell then turned to street bikes. He obtained a large quantity of XR1000 motors via his contacts at H-D, and he used these to create the RR1000 Battletwin. Between 1987 and 1988, Buell delivered 50 bikes to customers, placing the Buell Motor Company on the map.


Buell RR1200

When his supply of XR1000 motors ran out, Buell adopted the new H-D 1200cc Evolution engine, upgrading the bike and making the necessary changes to package the new powerplant. Through the 1989 model year, Buell created an esitmated 65 RR1200 bikes.

Airtech has fairings for both models, and even some hard to find race stuff!

 

 

Don McCaw at the Bonneville salt flats on his land speed RR1200 circa 1991/92. We have the racing lowers and matching lower tail panels as used on this bike and Battle of the Twins racers.

 

BRR1S
Buell RR1000 RR1200 Upper fairing- street
Replacement upper with headlight opening.

Price

BRR2A
Buell RR1000 Lower fairing - right
This is the replacement right lower fairing for your Buell RR 1000. It is different from the RR 1200 right lower fairing. The RR1000 lower does NOT have a large duct opening in it.

Price

BRR2B
Buell RR1200 Lower fairing - right
This is the replacement right lower fairing for your Buell RR 1200. It is different from the RR 1000 right lower fairing. The RR1200 lower fairing has a large duct opening in it.

Price

BRR3
Buell RR1000 RR1200 Lower fairing - left
This is the replacement left lower fairing for your Buell RR 1000 or RR1200. The left side lower fairing for both models is the same. The inside duct BRR3D is sold separately - listed below.

Price

BRR3D
Buell RR1000 RR1200 Lower fairing - inside duct
This is the inside duct for BRR3.

Price

BRR4
Buell RR1000 RR1200 Tail section

This is the replacement tail section for your Buell RR 1000 or RR1200.

Price

BRR4P
Buell RR1000 RR1200 Underseat enclosure

This is underseat enclosure for the tail section for your Buell RR 1000 or RR1200. It can be bonded into the tail section and creates a storage compartment in the tail, accessible by lifting up the upholstery pan BRR4UP listed below.

Price

BRR4UP
Buell RR1000 RR1200 Upholstery pan

This is upholstery pan for your Buell RR 1000 or RR1200.

Price

BRR4LP
Buell RR1000 RR1200 Upholstery pan

This is license plate bracket for your Buell RR 1000 or RR1200.

Price

BRR5
Buell RR1000 RR1200 Lower tail fairing - right
This is the replacement right lower tail fairing for your Buell RR 1000/1200. This filler panel fits behind the foot controls and connects the lower fairing to the tail section.

Price

BRR6
Buell RR1000 RR1200 Lower tail fairing - left
This is the replacement left lower tail fairing for your Buell RR 1000/1200. This filler panel fits behind the foot controls and connects the lower fairing to the tail section.

Price

BRR7A
Buell RR1000 RR1200 Front fender - front part
Replacement front fender part. This is the front half of the 2-piece front fender on the RR1000 and RR1200.

Price

BRR7B
Buell RR1000 RR1200 Front fender - rear part
Replacement front fender part. This is the rear half of the 2-piece front fender on the RR1000 and RR1200.

Price

BRR8
Buell RR1000 RR1200 Fuel tank
This is a replacement fuel tank for the Buell RR1000 and RR1200. The stock tank on your RR was made out of fiberglass as well and by now modern fuel has probably tore up the inside causing all kinds of problems. Airtech can help you by making a brand new tank. We can epoxy coat the inside of your new tank to prevent future problems. Please ask your sales rep when placing the order!

More photos

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent. In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only!
Read more...

Price

LAND SPEED / BATTLE OF THE TWINS RACING

Don McCaw at the Bonneville salt flats on his land speed RR1200 circa 1991/92. We have the racing lowers and matching lower tail panels as used on this bike and Battle of the Twins racers.

 

BRR2LSR
Buell RR1000 RR1200 Land Speed Lower fairing - right
This is the land speed right lower fairing for your Buell RR 1000/1200. This is the right side of the race lowers as used on Don McCaws record setting Buell RR and on Battle of the Twins racers. These lowers come into a point towards the front tire unlike the stock lowers. Requires matching lower tail panels listed below.

Price

BRR3LSR
Buell RR1000 RR1200 Land Speed Lower fairing - left
This is the land speed left lower fairing for your Buell RR 1000/1200. This is the left side of the race lowers as used on Don McCaws record setting Buell RR and on Battle of the Twins racers. These lowers come into a point towards the front tire unlike the stock lowers. Requires matching LSR lower tail panels listed below.

Price

BRR5LSR
Buell RR1000 RR1200 Land Speed Lower tail fairing - right
This is the matching land speed right lower tail fairing for your Buell RR 1000/1200. This filler panel fits behind the foot controls and connects the lower fairing to the tail section. Only fits BRR2LSR.

Price

BRR6LSR
Buell RR1000 RR1200 Land Speed Lower tail fairing - left
This is the matching land speed left lower tail fairing for your Buell RR 1000/1200. This filler panel fits behind the foot controls and connects the lower fairing to the tail section. Only fits BRR3LSR.

Price

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
BUELL RR1000 RR1200 BATTLETWIN 1985-'88
BRR1S
BUELL RR 1000 1200 UPPER FAIRING - STREET
$297.00
BRR2A
BUELL RR 1000 LOWER FAIRING - RIGHT
$247.00
BRR2B
BUELL RR 1200 LOWER FAIRING - RIGHT
$247.00
BRR3
BUELL RR 1000 1200 LOWER FAIRING - LEFT
$247.00
BRR3D
BUELL RR 1000 1200 INNER DUCT
$40.00
BRR4
BUELL RR 1000 1200 TAIL SECTION
$297.00
BRR4P
BUELL RR 1000 1200 UNDERSEAT ENCLOSURE
$62.25
BRR4LP
BUELL RR 1000 1200 LICENSE PLATE BRACKET
$62.25
BRR4UP
BUELL RR 1000 1200 UPHOLSTERY PAN
$62.25
BRR5
BUELL RR 1000 1200 LOWER TAIL FAIRING - RIGHT
$159.00
BRR6
BUELL RR 1000 1200 LOWER TAIL FAIRING - LEFT
$159.00
BRR7A
BUELL RR 1000 1200 FRONT FENDER - FRONT PART
$159.00
BRR7B
BUELL RR 1000 1200 FRONT FENDER - REAR PART
$89.00
BRR8
BUELL RR 1000 1200 FUEL TANK
$775.00
LAND SPEED / BOT RACING
BRR2LSR
BUELL RR 1000 1200 LAND SPEED LOWER FAIRING - RIGHT
$247.00
BRR3LSR
BUELL RR 1000 1200 LAND SPEED LOWER FAIRING - LEFT
$247.00
BRR5LSR
BUELL RR 1000 1200 LAND SPEED LOWER TAIL FAIRING - RIGHT
$159.00
BRR6LSR
BUELL RR 1000 1200 LAND SPEED LOWER TAIL FAIRING - LEFT
$159.00

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices