GPR50 '02-'03

All Prices are listed at the bottom of the page

DGPR1C
Derbi GPR50 Competition upper fairing
If you're racing your little GPR50 you're going to need one of these upper fairings. The headlight holes and turn signal holes have all been filled in for race purposes, and is legal for most racing organizations. Get yours today!

Price

DGPR1S
Derbi GPR50 Street upper fairing
This is a replacement upper for your GPR50 race replica street bike. Replace crash damaged bodywork or replace that heavy plastic with our lightweight fiberglass.

Price

DGPR2
Derbi GPR50 right lower fairing
Replace those heavy plastic lowers with our lightweight fiberglass. It mounts to all of your existing stock brackets and use your stock hardware. This piece will lighten up your race 50.

Price

DGPR3
Derbi GPR50 left lower fairing
Replace those heavy plastic lowers with our lightweight fiberglass. It mounts to all of your existing stock brackets and use your stock hardware. This piece will lighten up your race 50.

Price

DGPR4
Derbi GPR50 street tail
This is a replacement piece for the GPR50 race replica tail section. This seat has an open seat pan cut out so you can use your stock upholstery and had the passenger provision cut open for access to your fuel tank. This is a lightweight replacement for the heavy stock pieces.

Price

DGPR4S
Derbi GPR50 Superbike race tail
If your seriously racing your GPR50 you need one of these race tails. There is a flat seat pan used for lightweight closed race foam and the passenger provision has been removed and the solo seat cowl is molded into it for a clean race tail section. The side area is large enough for number plates and is a race legal tail section for most racing organizations. If you're racing a bike you need one of these tails. Call one of our sales reps today!

Price

DGPR6
Derbi GPR50 Front fender
Replace your heavy plastic fender with this lightweight fiberglass fender. Simply drill the mounting holes and mount it onto your front forks. This removes a lot of weight off of your front end so that your suspension reacts faster so that you have better control. Improve the handling of your bike with this front fender. Give our sales reps a call today!

Price

DGPR7
Derbi GPR50 rear swingarm fender
Replace your heavy black plastic rear fender with this lightweight fiberglass piece. Your suspension will react faster without all of that extra weight. Custom color match you parts to match the rest of the paint scheme on your chassis. This part is available is carbon fiber as well. Talk to one of our sales reps today about the price.

Price

DGPR8
Derbi GPR50 Fuel tank shell
Replace you heavy stock plastic fuel tank with our lightweight fiberglass piece. Passenger provisions in front for mounting the stock hinge assembly. If you are racing your GPR you need one of these tank shells.

Price

DGPR9
Derbi GPR50 Headlight surround
This is the piece that goes around the headlight assemblies that fits inside of your stock plastic. This piece used to be that fake looking carbon fiber. This lightweight fiberglass piece allows you to custom color match the rest of your chassis or this piece is available in REAL carbon fiber. Call one of our sales reps for a price today!

Price

DGPR10
Derbi GPR50 Under seat enclosure
This piece replaces all that plastic crap underneath your tail section. This lightweight fiberglass piece is easily painted to match the color of the rest of your body or is available in carbon fiber. Call our sales reps today!

Price

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
DERBI GPR50 2002-03
DGPR1S
DERBI UPPER FAIRING- COMPETITION
$159.08
DGPR1C
DERBI UPPER FAIRING- STREET
$159.08
DGPR2
DERBI LOWER FAIRING- RIGHT
$145.23
DGPR3
DERBI LOWER FAIRING- LEFT
$145.23
DGPR4
DERBI TAIL SECTION - STREET
$228.24
DGPR4S
DERBI TAIL SECTION - SUPERSPORT
$207.02
DGPR6
DERBI FENDER - FRONT
$62.25
DGPR7
DERBI FENDER - REAR
$62.25
DGPR8
DERBI TANK COVER
$110.66
DGPR9
DERBI HEADLIGHT INSERT
$48.41
DGPR10
DERBI UNDER TAIL - RACE
$92.21

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices