CB400 CM400 CB450SC '78-'86

All Prices are listed at the bottom of the page

 

Everyone knows there are plenty of options for a cafe conversion on a CB350, but a whole lot of nothing for the later CB400, CM400, 450 and CB450SC Nighthawk. Airtech can lend a hand! Granted, these bikes are a little more difficult to convert because of the frame, but they are readily available at a reasonable price so if you've got one, we can make you some cool parts!

The biggest hurdle was the fuel tank, because of the size of the backbone on these models. Airtech took our most popular CB350 race tank, the Drixton style, and completely redesigned the tunnel to fit over the frame of it's younger brothers.

Many seats will work including the 350 seats shown here, but all will require fabrication of a subframe or modification of the rear half of the frame, to get rid of the "dip" in the frame btween the tank and the shock area. This area needs to be flat to install a seat and get proper alignment of seat and tank.

CR3502F
Honda CR350 Factory style race seat

Short little bubble seat that fits onto the back of the chassis. This seat is fairly short (20" overall) so it works best with one of our cafe tanks below. If you are using the stock tank use the long version of this seat CR3502FL.

Seat foam

Price

CR3502FL
Honda CR350 Factory race seat - long
Especially designed to work with the stock tank on the CB350. Identical in shape to the CR3502F but seat pan is +3" longer.

Seat foam

Price

CR3502D
Honda Drixton style race seat

Short little box seat that fits onto the back of the chassis. This seat is fairly short (21" overall) so it works best with one of our race tanks below.

Seat foam

Price

CR3502DL
Honda CR350 Drixton race seat
Identical to CR3502D but seat pan is +3" longer so works well with stock length tank.

Seat foam

Price

CR3503DCM
Honda CR350 Drixton tank for CB/CM400 450
This is a cool Drixton style road racing tank. It's got nice knee cutouts to grip the tank and it's not as long as the original CR450 tank so you can move around on your seat. It slides onto the rubber bungs on the frame in the front, and the back has a large mounting tab. You will have to fabricate a rear support bracket if the tank is raised above the frame - which is likely because the frames dip in the center.

Please note: Nighthawk 450 with bolt-in front tank mount will have to fabricate rubber puck mounts.

More photos

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

OCP2
Vintage race belly pan / oil containment -

2-cyl
This universal belly pan was originally designed for the Honda SL350 shown here, fitted with a 2-1 exhaust system. Will fit many small twins with similar exhaust system and can be modified for others. Trimming around exhaust and kickstand is required.

Measurements:
Overall length: 26.75"
Inside length between f/r dams: 22"
Width front: 7"
Width back: 11.25"
Depth (center): 4.5"

More photos

Recommended for installation:
4 rubber cushion loop clamps
4 flush head fasteners


Price

 

Vintage oil containment belly pan OCP2 mounted on a Honda CB350 with 2-1 exhaust.

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
HONDA CM400 CB400 CB450SC TWINS 1978-'86
CR3502D
HONDA CB350 DRIXTON SEAT
$131.41
CR3502F
HONDA CB350 FACTORY SEAT
$131.41
CR3502FL
HONDA CB350 FACTORY SEAT - LONG
$131.41
CR3503
HONDA CR350 TANK FOR SL350
$494.65
CR3503CB
HONDA CR350 TANK FOR CB350 CL350
$494.65
CR3503DCB
HONDA CB350 CL350 DRIXTON TANK
$494.65
CR3503DSL
HONDA SL350 DRIXTON TANK
$494.65
CB350OCP
HONDA CB350 OIL CONTAINMENT PAN
$62.25
OCP2 VINTAGE RACE BELLY PAN WITH OIL CONTAINMENT - 2 CYL $138.32

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices

 

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!