CB750F DOHC 1979-'82

All Prices are listed at the bottom of the page

The 1969 Honda CB750 changed the face of motorcycling when it came out and a decade of development produced the DOHC CB750F - as well as it's 900cc and 1100cc brothers!
CB1100F2
Honda CB1100 F Right Seat Side

This is the right side cover bellow the seat that hides all of your battery and wire crap. Although not an exact replacement of the CB1100 F panel this piece will fit all CB 750, 900, 1100 F model bikes.

Price

CB1100F3
Honda CB1100 F Left Seat Side

This is the left side cover bellow the seat that hides all of your battery and wire crap. Although not an exact replacement of the CB1100 F panel this piece will fit all CB 750, 900, 1100 F model bikes.

Price

CB1100F4
Honda CB1100 F Front Fender

Although not an exact replica of the CB1100 F panel this piece fits a ton of bikes. Pretty much anything with an 18" or 19" tire.

Price

RCB1000 Replica

Endurance racing was HUGE in Europe and the Honda RCB 1000 destroyed it's competition when it arrived on the scene in 1976. In the capable hands of Jean-Claude Chemarin - with stand in rider Alex George - it won the 1976 Bol d'Or 24hr and just about any other race that year.

We offer some options for fairings and tail sections on the CB750F but until now, no fuel tank. However, we've just finished up a stunning RCB replica fuel tank that fits the DOHC frame, and have a matching seat already.

RCB2
Honda RCB 1000 seat

Price

RCB3
Honda RCB1000 tank
This tank was modified to fit the DOHC CB750F, CB900F - and likely CB1100F frames. Shown here with the FCC1 fuel cap upgrade.

Price

Cafe parts

CR7501
Full fairing

What we have here is an exact replica of the kit fairing assembly that Honda offered for the CB750's. This classic one-piece race fairing assembly is extremely popular for vintage conversions. A tall fairing assembly works well with most street bike chassis; the open belly pan at the bottom allows you to adjust the width of the bottom. You can suck the fairing in real tight if you are installing on a 350 or 450 twin or spread it out wide if you are putting it on a 6 cylinder CBX. This is a very versatile and universal fairing assembly for a lot of applications. This is the classis café fairing that you need for your conversion.

Price

CR7501D
Oil Cooler Ducts

This is a "Works" part that was not available through the Honda CR kit part numbers. If you look at pictures closely enough at the '69 Daytona Bike (the orange one above) you'll see these two D shaped holes in the upper section of the fairing below the handlebars. Those holes were cut in the side of the fairing to evacuate the air out of the oil cooler, mounted onto the front forks. These duct assemblies were put behind the oil coolers and then sucked air out of the sides of the fairing to make the oil cooler more efficient. These are very rare, non-stock Honda pieces that are now made available to you. Call our sales reps and get a pair of them today!

Price

CB75021M
Cafe seat
Modified version, excellent fit on DOHC Honda CB750, or on the SOHC if you want the seat directly on the frame rails.

Price

CB75021UP
Upholstery pan for CB75021 and CB75021M

Price

CR7502F
Race Tail

What we have here is a factory style of tail section that was only available on some Honda factory prepared race bikes in Europe and Australia. Slightly different bubble shape than the kit tail section or the works tail section. This is a pretty cool seat and will work on a lot of other motorcycles.

Price

CR7502K
Race Tail

This is an exact replica of the kit style race tail that was available through your Honda dealers when you converted your CB750 into a CR racer.

This very short seat works best with our long road racing style fuel tank. If you are using a stock CB gas tank this seat would put you too far forward so you would be right up against the fuel tank in an uncomfortable riding position.

Price

 

CR7502KUP
Upholstery Pan

What we have here is a fiberglass seat pan that fits our CR7502K kit race tail section. Simply mount your tail section onto your chassis, place our upholstery pan onto your tail section, and position for mounting boltholes. Drill a couple of mounting bolt holes and position epoxy the short small bolds onto your seat pan, then take this pan to your local auto upholstery place to have them upholster it for you. This is a must have if you want to finish off your CR replica race bike.

Price

CR7502W
Race Tail

This is the works style of tail section, and this tail section is the exact original style of tail section that was on the Dick Mann 1969 Daytona road race motorcycle. So if you’re building and exact Dick Mann replica this is the tail section that you need! Call one of our sales reps today!

Price

UBS
Universal cafe tail

This cool duck tail breathes 70s chic... It fits both the CB 750 K and F chassis. You need to clean up the frame rails underneath the seat by removing some brackets and latches.

Price

LAVS2
Laverda seat without hatch door.

Price

 

AJSM4K
Dunstall cafe racer quarter fairing - kit

Complete kit consisting of the following parts:
- fairing
- windscreen (smoke)
- fairing brackets (2)
- windscreen screws (black)

This convenient kit provides you with all the parts you need* to mount the fairing onto your bike, for a great price!

*Ask our sales reps for mounting tips, you will want to fabricate a simple mounting bracket, coming off the brake splitter or bottom fork clamp for additional support.

Please note: You may substitute the competition version of this fairing AJSM4C in this kit, part# AJSM4CK.

Price

AJSM4C
Dunstall cafe quarter fairing - competition

This is the race version of the Dunstall quarter fairing. Great quarter fairing for a vintage race or track bike.
Also a cool little fairing to use on a custom street bike with a custom headlight. Also available in kit form with hardware and windscreen, part# AJSM4CK.

Price

NOSE1
Honda CB1100 F Chin scoop
Period correct piece for big fours.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
CB750F 1979-'82 DOHC
CB1100F2 HONDA CB1100 F SEAT SIDE - RIGHT $41.50
CB1100F3 HONDA CB1100 F SEAT SIDE - LEFT $41.50
CB1100F4 HONDA CB1100 F FENDER - FRONT $82.99
RCB2 HONDA RCB1000 SEAT $145.23
RCB3 HONDA RCB1000 FUEL TANK $604.87
CR7501
HONDA CR750 FAIRING
$276.64
CB75021M
CB 750 CAFE SEAT - MODIFIED
$131.41
CB75021UP
UPHOLSTERY PAN FOR CB75021
$37.00
CR7502K
HONDA CR750 TAIL SECTION- KIT SUPERBIKE
$131.41
CR7502KUP
HONDA CR750 SUPERBIKE-SEAT PAN
$37.00
CR7502F
HONDA CR750 TAIL SECTION-SUPERBIKE-FACTORY
$131.41
CR7502W
HONDA CR750 TAIL SECTION-SUPERBIKE-WORKS
$131.41
CR7502W
HONDA CR750 TAIL SECTION-SUPERBIKE-WORKS
$131.41
LAVS2 LAVERDA SEAT W/OUT HATCH DOOR $131.41
UBS UNIVERSAL BIMOTA SEAT $131.41
AJSM4K
CAFE QUARTER FAIRING KIT
$189.95
NOSE1 HONDA CB1100 F CHIN SCOOP $138.32

 

To order call 760-598-3366 NOW!

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!