CBR 1000 RR 2006-'07

All Prices are listed at the bottom of the page

If your in the market for some new CBR1000 fairings, you've come to the right place! The '06-'07 model is different from the previous model by the front fairing only, so Airtech's got you covered with a full set of fairings. Including an race upper fairing, mids, lower fairing, tail section and a fuel tank cover. If you're drag racing (or just have a reaaaally long swingarm), you'll fancy our +10 tail and dragbike seat pan.

Give us a call today!

3CBR1C
Honda CBR1000 upper fairing
- competition
The headlight opening was filled in for competition use but can easily be cut out for street applications. Will work with the stock mids or our replacemnt parts.

Price

3CBR12
Honda CBR1000 center side fairing - right
mid
Replacement right mid. Will work with stock upper and lower or our replacement parts.

Price

3CBR13
Honda CBR1000 center side fairing - left
mid
Replacement right mid. Will work with stock upper and lower or our replacement parts.

Price

3CBR14
Honda CBR1000 Superbike lower fairing - belly pan
w/ oil containment
Replacement lower fairing / belly pan. Will work with stock upper and mids or our replacement parts. We have modified this lower for oil containment. If you are racing a Honda CBR1000 RR you need one of these!

Price

2CBR15S
Honda CBR1000 Supersport tail section

This is the supersport tail section for your Honda CBR 1000 RR. We've taken the right and left seat sides, and the solo seat cowl and molded them into a one-piece race tail. It hides the passenger part of the seat.

Price

Give your street bike a custom race look with this supersport race tail. Get yours today!

 

2CBR15DBT1
Honda CBR1000 Dragbike tail section +10
We've stretched our Supersport tail into a +10 tail section for your CBR 1000 RR, as seen on Kent Stotz's drag bike.

Price

2CBR15SP
Honda CBR1000 Dragbike seat pan
Replaces your stock CBR 1000 RR seatpan for this lightweight, stepped drag bike seat pan. Longer and bigger than stock, trimming and fitting required.

Price

3CBR16
Honda CBR1000 Front fender

This is the front fender for your Honda CBR 1000 RR.

Price

 

2CBR17
Honda CBR1000 Fuel tank cover
Replace the heavy stock cover for our lightweight fiberglass one. If you've busted up yours, you'll be saving hundreds of dollars over an OEM cover.

Price

2CBR17M
Honda CBR 1000 Fuel tank cover - modified drag race
This tank shell is sloped at the rear for drag racing.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
HONDA CBR 1000 RR 2006-'07
3CBR1C HONDA CBR 1000 RR UPPER FAIRING - COMPETITION $131.41
3CBR12 HONDA CBR 1000 RR CENTER SIDE FAIRING - RIGHT MID $159.07
3CBR13 HONDA CBR 1000 RR CENTER SIDE FAIRING - LEFT MID $159.07
3CBR14 HONDA CBR 1000 RR LOWER FAIRING - BELLY PAN $207.48
2CBR15 HONDA CBR 1000 RR SUPERSPORT TAIL SECTION $197.98
2CBR15DBT1 HONDA CBR 1000 RR DRAGBIKE TAIL SECTION +10 $228.24
2CBR15SP
HONDA CBR 1000 RR SEAT PAN $89.90
3CBR16 HONDA CBR 1000 RR FRONT FENDER $62.25
2CBR17 HONDA CBR 1000 RR FUEL TANK SHELL $173.63
2CBR17M HONDA CBR 1000 RR FUEL TANK SHELL - MODIFIED DRAG RACE $173.63

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices

 

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!