|
|
The fourth generation CBR600 is quite an
impressive piece unless you have rashed or crashed bodywork.
If it does, we can help. As you can see from these pictures
we offer quite a large selection of bodywork for the F4. Not
only do we have a street upper fairing, as well as a competition
upper, right and left lowers. And for you racers we offer a
two-piece fairing design with a one piece upper and one piece
lower that incorporates oil containment for various racing organizations.
You have a choice of either a super sport or super bike tail
section as well as a front fender. If your looking at replacing
crash damaged bodywork or want to prep your bike for the race
track and give us a call because we got what you need.
|
 |
 5CBR61HRC
Honda CBR 600 F4 Super Sport Upper fairing
This is the upper fairing to our two-piece race fairing
assembly. This is the upper, around the headlight area, and half
of the right and left lowers, and the radiator shrouding all molded
into a one-piece unit. This fairing assembly splits half way down
the side of the bike and only works with our 5CBR62HRC lower fairing.
If you’re racing a CBR 600 F4 this two-piece race fairing
is what you need!
Only works with the 5CBR62HRC
lower fairing. |
 |
 5CBR62HRC
Honda CBR 600 F4 Super Sport lower fairing
This is the lower section to our two-piece super sport
race fairing assembly. This is the bottom half of the right and
left lower, the front radiator shrouds, and oil containment all
molded as a one-piece unit. This lower meets all AMA and FIM oil
containment rules. This fairing only works with our 5CBR61HRC
upper fairing. If your racing and F4, you need this part!
Only works with the 5CBR61HRC
upper fairing. |
 |
 5CBR61C
Honda CBR 600 F4 Competition upper fairing
Have a race bike? Or just want to take your bike out
to some track days? If so, this is the piece for you! Take off
that expensive stock Honda upper fairing and expensive headlight
and put on our competition version. It is identical in exterior
shape to your stock Honda piece with the exception to your headlight
holes are filled and the turn signal bumps have been smoothed
out. Don’t risk damaging your expensive Honda pieces at
a track day, or maybe you just want to do a custom street application
and want to cut your own headlight holes out of the front. This
is what you need!
|
 |
5CBR61S
Honda CBR 600 F4 Street upper fairing
Need to replace a crash damaged upper fairing on your
CBR 600? This is the part that you need! Our fiberglass upper
is identical in exterior shape and design to your original Honda
piece, the only exception is that we do not do the internal tab
work for the headlights and air ducts, but that’s no big
deal. They’re not really needed. A crafty guy can get this
mounted onto his bike in a matter of minutes and save you hundreds
of dollars over the stock Honda piece. If you have questions on
how to mount this onto your chassis please call our sales reps,
we will be happy to explain it to you. You’ll save you a
bunch of money over the stock Honda piece. Get yours today!
|
 |
 5CBR62
Honda CBR 600 F4 Right lower fairing
This is an inexpensive way to replace a crash damaged lower.
|
 |
 5CBR63
Honda CBR 600 F4 Left Lower fairing
Replace your expensive crash damaged plastic pieces with one of
our lightweight fiberglass panels. Get yours today!
|
 |
 5CBR66
Honda CBR 600 F4 Front Fender
This is a direct replacement for the CBR600 F4 simply drill the
mounting holes, install onto your bike, and go for a ride!
|
 |
 5CBR69
Honda CBR 600 F4 Undertail - under seat enclosure
This is a real cool fiberglass piece that mounts underneath our
tail sections and encloses the bottom for a clean custom look.
This piece has a license plate mount already molded into it for
a clean design instead of that ugly black plastic stock panel
on your bike. This requires some cutting and trimming of the black
panels and pretty much anything that sticks below the stock painted
body panels. Takes a moderate skill level and some hand tools
to install. If you have the desire to have a cool under tail on
your bike this is the piece you need.
|
 |
 5CBR69S
Honda CBR 600 F4 Super Sport Race Tail
This is our most popular one-piece race tail for the CBR 600 F4.
This is the right and left seat side and the solo seat cowl molded
as a one-piece unit. Simply slide your long upholstery into the
seat assembly so that the fiberglass tail hides the passenger
part of the seat and stick the assembly onto your chassis for
a one-piece race look. The tail light holes are filled in for
racing but can be easily cut open for street use. This race tail
meets all of the number plate requirements for most racing organizations.
This tail section can also be used for that cool race look on
a custom street bike. Get yours today!
|
 |
5CBR69B
Honda CBR 600 F4 Super Bike Race Tail
This tail section is similar to our Super Sport Race Tail with
the exception of that the seat pan area, where the rider sits,
is filled in. This seat requires the use of our 5CBR69SB Seat
Bracket and lightweight, thin race foam that is also available
at Air-Tech. Most racers prefer this style of seat that uses a
thinner race pad so that they can feel the rear tire and rear
suspension more on the bike. This tail meets most race organization
number plate requirements.
Use with 5CBR69SB. |
 |
 5CBR69SB
Honda CBR 600 F4
Seat Bracket: this is the bracket used to support the riders weight
if you are using our 5CBR69B Super Bike Race Tail.
|
 |
 GLF4A
F4 Grey Line
Honda CBR 600 F4
What we have here folks is a smokin’ deal on a set of bodywork
for your F4. If you are replacing crash damaged bodywork or need
track bodywork this is the kit for you. If your track organization
does not require oil containment this three-piece fairing assembly
is the easiest to mount onto your chassis. This includes our competition
upper fairing with right and left lowers. This kit also has our
super sport race tail and front fender. Once again, you can save
yourself a ton of money and get a great deal. If you stunt ride
your bike, need crash replacement, or just track day bodywork,
this is the kit you need.
|
 |
GLF4B
F4 Grey Line
Honda CBR 600 F4
This is a complete body kit for an F4 utilizing our two-piece
race fairing assemblies. This kit comes with a super sport upper
and super sport lower with oil containment. This kit also includes
our super sport race tail to use your stock upholstery as well
as a front fender. This kit is approved by most racing organizations
and used widely across the Unites States in road racing competitions. |
 |
GLF4C
F4 Grey Line
Honda CBR 600 F4
Complete body kit with our super sport race upper, our super sport
race lower with oil containment, our super bike race tail, and
front fender assembly. This kit meets and exceeds all of the requirements
of most racing organizations. |