ZX11 D 1993-'01

All Prices are listed at the bottom of the page

 

2ZX111C
Kawasaki ZX11 competition upper fairing
If you're drag racing your Kawasaki ZX11 like a lot of people do or want to take some weight off of that heavy thing this competition upper fairing is exactly what you need. A lot of the street bike shoot out guys will take this upper fairing, cut a small hole for a projector beam and airbrush in the stock headlight shape that way they save a lot of weight. They'll also do the same thing to the turn signals. But if you want to cut the headlight open or the turn signals out to use your stock headlight and turn signals it's no problem just call our sales reps and they will have some suggestions on how to do that. Any way you want to do it call our sales reps and get one today!

Price

2ZX112
Kawasaki ZX11 right lower fairing

Replace your crash damaged right lower or take a bunch of weight off of your bike with one of our light weight fiber glass right lower for your Kawasaki ZX11. The Kawasaki ZX11 panels are pretty big: therefore they are pretty heavy. Simply drill the mounting holes and mount to all of your stock brackets with your stock fasteners. A little bit of fabrication work will need to be done in the front at the radiator shroud behind the front tire, but a crafty guy can do that quickly as well as save some weight off his motorcycle and a lot of money by putting this lightweight Air-Tech lower on his bike.

Price

2ZX113
Kawasaki ZX11 left lower fairing
Replace your crash damaged left lower or take a bunch of weight off of your bike with one of our light weight fiber glass right lower for your Kawasaki ZX11. The Kawasaki ZX11 panels are pretty big: therefore they are pretty heavy. Simply drill the mounting holes and mount to all of your stock brackets with your stock fasteners. A little bit of fabrication work will need to be done in the front at the radiator shroud behind the front tire, but a crafty guy can do that quickly as well as save some weight off his motorcycle and a lot of money by putting this lightweight Air-Tech lower on his bike.

Price

2ZX114A
Kawasaki ZX11 front fender - front part
This is the front part of the two-piece fender on your Kawasaki ZX11.

Works with a 2ZX114B rear part.

Price

 

 

2ZX114B
Kawasaki ZX11 Front fender - rear part

This is the rear portion of the two-piece fender assembly on your Kawasaki ZX11.

Works with a 2ZX114A front part.

Price

 

2ZX115
Kawasaki ZX11 seat sides

This is the right and left seat sides and tail light area molded as a one-piece unit to fit your Kawasaki ZX11. The tail light and signal holes have been filled in for racing but they are very easy to cut open for a street bike.

Price

 

 

2ZX116
Kawasaki ZX11 fuel tank shell
This is the top part of the gas tank, just the gas tank shell. This does not hold fuel. A lot of drag racers use this piece, especially the turbo boys because they need a lot of room under the gas tank for their turbo assemblies. You will need the fuel tank for your bike, but this is just the top shell that hides all of that stuff.

Price

2ZX117
Kawasaki ZX11 dash panel

If you have a ZX11 you'll know that those plastic tabs on your plastic dash panel break off. This is a lightweight fiberglass piece that is much stronger that that plastic piece. You'll need to do some cutting and trimming, we have filled in the dash area. A lot of racers don't use the dash and just put gauges up there, but it is usually cut open for street bike guys. With a little trimming it would go right onto a street bike.

Price

2ZX119
Kawasaki ZX11 supersport race tail

This is our supersport tail section for the Kawasaki ZX11 with a solo seat cowl molded in the place where the passenger provision was on the back of the motorcycle. Simply insert your long upholstery inside this tail section and mount onto the chassis. The solo seat cowl area hides the back part of the tail section for a one-piece race look for your Kawasaki ZX11.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
ZX11D 1993-01 ('93 SINGLE OR DUAL SNORKEL)
2ZX111C
KAWASAKI ZX11 UPPER FAIRING - COMPETITION
$213.10
2ZX112
KAWASAKI ZX11 LOWER FAIRING - RIGHT
$207.02
2ZX113
KAWASAKI ZX11 LOWER FAIRING - LEFT
$207.02
2ZX114A
KAWASAKI ZX11 FENDER - FRONT / FRONT PART
$82.99
2ZX114B
KAWASAKI ZX11 FENDER - FRONT / REAR PART
$41.50
2ZX115
KAWASAKI ZX11 SEAT SIDES TAIL CLIP FAIRING
$207.02
2ZX116
KAWASAKI ZX11 TANK SHELL-TOP ONLY!
$207.02
2ZX117
KAWASAKI ZX11 DASH PANEL
$207.02
2ZX119
KAWASAKI ZX11 TAIL SECTION-SUPERSPORT
$207.02

Looking for some Kawasaki ZX7R bodywork or ZX9R or ZX10 fairings? Have a little Ninja EX 250 or EX 500 in need of some fairings? How about a quarter fairing for your GPZ or ZRX? Or a cafe seat for a Kawasaki H2 or KZ 650? Kawasaki dragbike anyone? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

 

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices