GSXR 1000 '01-'02

All Prices are listed at the bottom of the page

Hottt!!! That's what we say about our bodywork. We've got more GSXR 1000 fairings than you can shake a stick at! Whether you're looking for a race or street fairing, race tail, undertail or stock replacement lowers, Airtech's got what you need!

7GSXR7SS1
Suzuki GSXR 1000 Supersport race upper
fairing
What we have here is the upper fairing to our two-piece race fairing assembly. This piece is the upper headlight area with the headlight holes filled in and half of the right and left lowers and the radiator shroud all molded as a one-piece unit. This fairing splits with the upper and lower down about the base gasket of the cylinder of the bike down halfway threw the side. This allows you to remove the fairing assemblies on and off the bike very quickly and easily also allowing a smooth clean design because you don't any parting seams up by the handlebars or around all of the radiator shrouding. This piece only works with our 7GSXR7SS2 lower.

Please note: This is a GSXR750 part that will work on your GSXR1000. You'll have to fabricate a small bracket out of flat strap from the rear cylinder head mount to the mounting hole on the fairing, just behind the large vent. The hole is about an 1" forward compared to the GSXR1000.

Price

7GSXR7SS2
Suzuki GSXR 1000 Supersport race lower
fairing
This is the bottom half to our two-piece super sport race fairing assembly. This piece is the bottom right and left lowers, the front radiator shrouding, and the oil containment belly pan all molded as a one-piece unit. This fairing is cut open on the left hand side for your generators and does have a side stand provision. This piece only works with our 7GSXR7SS1 upper fairing.

Please note: This is a GSXR750 part that will work on your GSXR1000. You'll have to trim the lower slightly in the rear to clear the oil cooler on the GSXR1000.

Price

7GSXR12
Suzuki GSXR 1000 Right lower
fairing
Lightweight replacement fairing for your damaged right lower. Drill the mounting holes and attach it to all of your stock brackets and use all of your stock hardware. A little fabrication is required down at the lower oil cooler guard behind the front tire. A crafty guy can do that in a few minuets or simply leave that radiator guard off. Save yourself a ton of money over the stock. Factory Suzuki pieces. Get yours today!

Price

7GSXR13
Suzuki GSXR 1000 Left lower fairing

Lightweight replacement fairing for your damaged left lower. Drill the mounting holes and attach it to all of your stock brackets and use all of your stock hardware. A little fabrication is required down at the lower oil cooler guard behind the front tire. A crafty guy can do that in a few minuets or simply leave that radiator guard off. Save yourself a ton of money over the stock. Factory Suzuki pieces. Get yours today!

Price

7GSXR71C
Suzuki GSXR 1000 Competition upper fairing

This is a great little upper fairing for custom street applications or track day bikes. Track day guys love this fairing because they can take there expensive stock headlight assembly off of there bike, paint our upper fairing put it on there bike and go. Custom street bike guys love this because they can cut different headlight shapes in front of the fairing to butt up against there stock headlights. We've seen people cut round headlights, cat's eyes, even a smiley face cut our of the front of the fairing and had the headlight shining threw in the back. This is a cool piece for your GSXR1000.

Price

7GSXR71S
Suzuki GSXR 1000 Street upper fairing
Replace your crash damaged street fairing with one of our lightweight fiberglass pieces. Simply replace all of your bent, busted brackets, drill out mounting holes out of our fiberglass fairing, and mount on your bike and go riding again. Please note that we do not do the tab work on the inside of our fairing for the headlights simply because the headlight is mounted into the metal fairing bracket, the fairing bracket supports the weight of the heavy headlight assembly. Although the headlight was retained in the fairing originally from Suzuki it is not necessary to hold the headlight onto the bike. Simply mount your headlight into your bracket, put the fairing assembly up on your bike, mount the fairing at the mirrors on the top, and mount the fairing on both sides at the lowers on the bottom and go riding. This method holds up great at over a hundred miles per hour. If you have any questions about the headlight mounting assembly call one of our sales reps or our tech guy today.

Price

7GSXR74B
Suzuki GSXR 1000 Superbike tail

What we have here is one of our one-piece race tails. We've taken the right and left seat sides, the solo seat cowl area, and the tail light area and molded it into a one-piece unit. We call this tail light super bike tail because the seat pan area where the rider sits is filled in and flat and uses close cell race padding instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!

We offer a bracket assembly (7GSXR74SB, shown below) to support the riders weight so the fiberglass tail section doesn't break.

Price

7GSXR74SB
Suzuki GSXR 1000 Seat Bracket

Use this seat bracket to support the riders weight when using our 7GSXR74B Super bike race tail. You will need to drill some mounting holes near subsection to mount this bracket. We've seen people put rib nuts in the frame, use self-tapping screws, and some people will even popper this into the frame. This is a quick and easy installation.

Price

 

 

7GSXR74S
Suzuki GSXR 1000 Supersport tail

Our most popular race tail for the GSXR 1000. This tail is right and left seat sides, the solo seat cowl, and tail light area all molded as a one-piece unit. The seat pan area, where the rider sits, is open to use with the stock Suzuki upholstery. This is an easy instillation, drill four mounting holes and mount onto your chassis. This is a race legal tail section for most racing organizations and is also a cool custom street bike tail section, the taillight is easily cut open for street use. Get yours today!

Price

7GSXR74S4
Suzuki GSXR 1000 Dragbike tail +4

Stretched+4, this tail section is like our 7GSXR74S but only four inches longer. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.

Price

 

 

7GSXR74S6
Suzuki GSXR 1000 Dragbike tail +6

Stretched+6: same tail as our 7GSXR74S but stretched six inches longer than stock. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.

Price

 

 

7GSXR74BB
Suzuki GSXR 1000 Battery box
Small battery box that will fit between the subframe rails on a custom race bike where the stock battery box and all teh attached crap has been removed. Perfect for use witha modern lithium ion battery.

Please note: bottom side up in the picture, in case you were wondering...

Price

 

7GSXR77
Suzuki GSXR 1000 Dragbike Seat pan - stepped

This stepped dragbike seat pan fits any of our supersport tail sections above, or can be used with your stock tail section. Puts you down lower in the seat pocket for better launching.

Price

 

 

7GSXR75
Suzuki GSXR 1000 Front fender

Direct replacement for the GSXR front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.

Price

 

 

7GSXR79
Suzuki GSXR 1000 Undertail - under seat enclosure street

Hack out all that ugly plastic crap underneath your tail section and install one of our cool fiberglass under seat enclosures.
This piece uses your stock DOT approved tail light assembly so you don't have to worry about someone rear ending you like happens with guys using undertails with dim LED lights. Those pieces are pretty unsafe, ours uses the stock DOT taillight.
Our piece also has a license plate bracket molded into it so you don't have to fabricate or bend any pieces of metal like our competitors under seat enclosures. Simply hack out your black plastic pieces, do a little bit of cutting and trimming, and custom paint this under seat enclosure for an awesome custom street bike.

Price

7GSXR79R
Suzuki GSXR 1000 Undertail - under seat enclosure race

Remove all that heavy black plastic under seat rear fender assembly and lighten up the back of your race bike. This race piece attaches inside of our super sport or super bike race tail and cleans off the inside bottom of your race bike. This is a must have to finish off the underside of your race bike.

Price

 

7GSXR711
Suzuki GSXR 1000 Fuel Tank

Here is a lightweight racing fuel tank for your GSXR. Yes, we mean lightweight. It's a tremendous weight saving off the top of your motorcycle. Your bike will handle a lot better, it will flick from right to left hand sides and turn into corners a lot faster without the extra weight on top of your motorcycle.

This race tank is identical in dimensions to the stock fuel tank. The fuel tank mounts to your stock rear-mounting bracket. It comes with a lightweight racing gas cap and has an aluminum flange in the bottom of the tank to use with your stock fuel pump. You can also add additional bungs in the bottom for nitrous or turbo systems. Just ask our sales reps for details. Tank comes with internal venting system. Save a ton of weight off of your bike and be able to increase the handling in your motorcycle by getting one of these fuel tanks today!

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

 

7GSXR711S
Suzuki GSXR 1000 Slammed fuel tank

This is an awesome racing gas tank for your GSXR. Not only is this gas tank lighter than your stock fuel tank but this gas tank is slammed and smaller. What we mean by that is that this gas tank is two inches lower in the rear, that part that digs into your stomach, it is two inches lower in the back and the gas tank is actually two inches narrower so you can hold onto the bike at your crotch better and your elbows aren't restricted when you're hanging off the side of the motorcycle. Drag racers love this gas tank because it allows them to slide forward and stay over the top of the tank. Road racers love this tank because it allows them to move around the motorcycle more freely than the stock fuel tank does. You will love this gas tank.

The gas tank has aluminum mounting plate in the back to use with your stock mounting brackets and has an aluminum flange to fit your stock fuel pump. It comes with a nice aluminum racing gas cap. Tank has internal venting. Other options include carbon fiber or additional bungs for nitrous or turbo. Whether you are drag racing or road racing your GSXR you need this gas tank. Purchase yours today!

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

Price

GL30A
Suzuki GSXR 1000 Grey line fairing set
This fairing set is extremely popular with our racers and also with the custom street guys because they can save themselves a lot of money. This four-piece set is everything you need for a paint set on your race bike or custom street bike. This set includes our super sport race upper fairing, super sport race lower fairing with oil containment, and this kit only comes with our super sport race tail section as well as a front fender.
All you need to do to run this kit on the street is cut out head- and taillight openings. With a little bit of fabrication skill you can save yourself a grip of money!

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSXR 1000 '01-'02
7GSXR71C
SUZUKI GSXR 1000 UPPER FAIRING - COMPETITION
$131.41
7GSXR71S
SUZUKI GSXR 1000 UPPER FAIRING - STREET
$159.07
7GSXR12
SUZUKI GSXR 1000 LOWER FAIRING - RIGHT
$159.08
7GSXR13
SUZUKI GSXR 1000 LOWER FAIRING - LEFT
$159.08
7GSXR7SS1
SUZUKI GSXR 1000 UPPER FAIRING - SUPERSPORT
$357.00
7GSXR7SS2
SUZUKI GSXR 1000 LOWER FAIRING - SUPERSPORT WITH OIL CONTAINMENT
$218.40
7GSXR74S
SUZUKI GSXR 1000 TAIL SECTION - SUPERSPORT
$206.64
7GSXR74B
SUZUKI GSXR 1000 TAIL SECTION - SUPERBIKE*
$197.60
7GSXR74S4
SUZUKI GSXR 1000 TAIL SECTION - SUPERSPORT +4 DRAG RACE
$218.40
7GSXR74S6
SUZUKI GSXR 1000 TAIL SECTION - SUPERSPORT +6 DRAG RACE
$218.40
7GSXR74SB
SUZUKI GSXR 1000 TAIL SECTION - SUPERBIKE MOUNTING BRACKET
$89.90
7GSXR74BB SUZUKI GSXR 750 TAIL SECTION - BATTERY/ELECTRONICS BOX $89.90
7GSXR77
SUZUKI GSXR 1000 DRAGBIKE STEPPED SEAT PAN
$89.90
7GSXR79
SUZUKI GSXR 1000 UNDER SEAT ENCLOSURE - STREET
$159.08
7GSXR79R
SUZUKI GSXR 1000 UNDER SEAT ENCLOSURE - RACE
$127.62
7GSXR75
SUZUKI GSXR 1000 FENDER - FRONT
$73.48
6GSXR76
SUZUKI GSXR 1000 FENDER - REAR SWING ARM
$89.90
7GSXR711
SUZUKI GSXR 1000 FUEL TANK - STANDARD SIZE
$687.63
7GSXR711S
SUZUKI GSXR 1000 FUEL TANK - SLAMMED SPRINT
$687.63
GL30A
SUZUKI GSXR 1000 GREYLINE KIT - SUPERSPORT*AMA*
$495.00

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices


Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!