GSXR 750 '90

All Prices are listed at the bottom of the page

The '90 Suzuki GSXR 750 Slingshot differs slightly from the '88-'89 model. The return on the upper fairing is slightly different and the vents on the mids are deeper and more square in shape than the earlier ones. We make all these pieces and much much more, so you can spruce up your ride with some new skins today!

3GSXR71S
Suzuki GSXR 750 Street upper fairing

This is a direct replacement fairing, just the turn signal holes have been filled in. Simply drill the mounting holes and mount onto your chassis. Replace your crash damaged bodywork with our lightweight fiberglass piece!

Price

3GSXR71C
Suzuki GSXR 750 Competition upper fairing
We made this race part for Yoshimura, they asked for a lower windscreen height so this fairing is an inch lower than stock. The thick return in the handlebar opening was because they didn't run a windscreen bracket on their race bikes and the fairing ears needed to be self supporting. You can install this fairing on your standard fairing bracket, you'll have to bend the mirror mounts down an inch or so to suit.

Price

3GSXR71E
Suzuki GSXR 750 Endurance upper fairing
This is identical in exterior shape to the stock GSXR upper fairing with the exception that one headlight hole has been filled in for endurance race purposes. You get the best of both worlds: one headlight, weight saving, room for a number and that classic endurance style look!

Price

3GSXR72
Suzuki GSXR 750 Right Mid

This is a direct replacement panel for the right mid side of your GSXR.

Price

3GSXR73
Suzuki GSXR 750 Left Mid

This is a direct replacement panel for the GSXR left side mid panel.

Price

2GSXR74
Suzuki GSXR 750 Lower fairing

This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.

Price

2GSXR74YR
Suzuki GSXR 750 Yoshimura Lower fairing

This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.

Requires trimming around the kickstand for use on a street bike.

Price

4GSXR72L
Suzuki GSXR 750 Long lower fairing - right
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.

Price

4GSXR73L
Suzuki GSXR 750 Long lower fairing - left

This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.

Price

2GSXR75
Suzuki GSXR 750 Supersport race tail

This is a cool one-piece race tail for your GSXR. This tail section is already cut out for the stock taillight. Works with the stock GSXR 750 upholstery.

Price

YGSXR74
Suzuki GSXR 750 Yoshimura Supersport race tail

This is a cool one-piece race tail for your GSXR. The taillight is molded in and would have to be cut out for street use. Works with the stock GSXR 750 upholstery, which will pop down with the standard seat locks.

The 'strap' in the middle of the seat area is an additional battery hold down strap. Many people cut this part out if they don't want it.

Price

 

2GSXR76
Suzuki GSXR 750 Front fender

Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.

Price

3GSXR77
Suzuki GSXR 750 Rear fender

Replacement for the busted stock rear fender. This rear hugger mounts to one vertical tab and 3 inserts.

Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has four vertical metal tabs on the swingarm, use 88-89 rear fender 2GSXR77.

Price

2GSXR77L
Suzuki GSXR 750 Lower rear fender

This lower rear fender attaches below the swing arm to keep oil, heat, and debris off of the rear tire.

Price

AT26M
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for aftermarket overbraced 1st and 2nd gen GSXR750 swingarms like SPF where the brace runs parallel to the arm.

Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean.

Inside width 9"
Outside width 11.75"
Fender length 13"
Depth 6.5"

Price

2GSXR78
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.

Price

 

2GSXR79
Suzuki GSXR 750 air grabbers - pair

These sculpted air grabbers do just that, they enlarge the intake area, 'grab' air and force it into the ducts. This greatly enhances the flow over the stock ducts.

These covers are easily installed onto your upper fairing with pop rivets.

Price

4GSXR79
Suzuki GSXR 750 windscreen air ducts
Another rare item form the Yosh collection... See the teardrop shaped air intake ducts next to the winscreen? That's what these are. They hook up to the custom, aluminum Yoshimura tank that you see in the picture, with smoothbore hose. The motor had a heatshield that came up from the back over the tranny, past the carbs en forward over the motor. These ducts supply cool clean air to this carburetor area. This was the last stage of development before actual pressurized airboxes were used.

You cut holes in the windscreen and screw these ducts on with windscreen screws.

These do not work with a stock tank or even our Yosh Sprint tank below. You will have to have a custom tank fabricated with ducts going through it.

Outlet OD 1.75"

Price

2GSXR710
Suzuki GSXR 750 Yoshimura carb covers

These carb covers are almost impossible to find, but we have them.

These covers are easily installed onto your chassis with zip ties (recommended) but we've seen velcro used too.

Price

2GSXR711
Suzuki GSXR 750 Yoshimura dry clutch duct
Another hard to find Yosh part! This is the small Yoshimura dry clutch naca duct that routes cool air to the dry clutch - or standard clutch for that matter. Cut a small hole in your stock or race fairing and rivet this little piece in. Only available from Airtech!

Price

2GSXRST
Suzuki GSXR 750 Fuel tank - Sprint

This is a slammed style fuel tank for you GSXR. You can save seven to eight pounds off the top of your bike with this lightweight fuel tank. It comes with one of our racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

YOSHIMURA F1

Did you know we designed all the Yosh stuff in the early to mid-nineties? They fit your 750! Click here to see the Yosh F1.

 

RGV REPLICA BODY KIT

Always dreamed of owning a GP bike? How about turning your trusty 'ole Gixxer into a Revvin' Kevin Schwantz RGV replica, you know, the Lucky Strike bike?

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSXR 750 '90
3GSXR71S SUZUKI GSXR 750 UPPER FAIRING - STREET $178.23
3GSXR71C SUZUKI GSXR 750 UPPER FAIRING - COMPETITION $159.08
3GSXR71E SUZUKI GSXR 750 UPPER FAIRING - ENDURANCE 1 HEADLIGHT $178.23
3GSXR72 SUZUKI GSXR 750 CENTER SIDE FAIRING - RIGHT $92.21
3GSXR73 SUZUKI GSXR 750 CENTER SIDE FAIRING - LEFT $92.21
2GSXR74 SUZUKI GSXR 750 LOWER FAIRING - ONE PIECE $200.56
2GSXR74YR SUZUKI GSXR 750 LOWER FAIRING - YOSH REPLICA $228.24
4GSXR72L SUZUKI GSXR 750 LONG LOWER FAIRING - RIGHT $159.08
4GSXR73L SUZUKI GSXR 750 LONG LOWER FAIRING - LEFT $159.08
2GSXR75 SUZUKI GSXR 750 TAIL SECTION - SUPERSPORT $200.56
YGSXR74 SUZUKI GSXR 750 YOSHIMURA TAIL SECTION - SUPERSPORT $228.24
2GSXR76 SUZUKI GSXR 750 FENDER - FRONT $62.25
3GSXR77 SUZUKI GSXR 750 FENDER - REAR SWING ARM $82.99
2GSXR77L SUZUKI GSXR 750 FENDER - LOWER REAR $82.99
AT26M SUZUKI GSXR 750 FENDER - REAR SWING ARM OVER BRACED $82.99
2GSXR78 SUZUKI GSXR 750 FRONT NUMBER PLATE $35.00
2GSXR79 SUZUKI GSXR 750 AIR GRABBERS - PAIR $47.52
4GSXR79 SUZUKI GSXR 750 WINDSCREEN DUCTS - PAIR $62.25
2GSXR710 SUZUKI GSXR 750 CARB COVERS $82.99
2GSXR711 SUZUKI GSXR 750 DRY CLUTCH DUCT $48.41
2GSXRST SUZUKI GSXR 750 FUEL TANK - SPRINT $687.63
RGV REPLICA BODY KIT
RGVRK RGV REPLICA COMPLETE STREET KIT $995.00
RGVRSK RGV REPLICA  TAIL SECTION $333.65

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices