GSX1300R HAYABUSA 2008-14

All Prices are listed at the bottom of the page

 

The '08 Busa is here! We'll be making a ton of stuff for this new Hayabusa, so keep checkin' back for updates. We have beautiful +6 street and +6 race tails done, a +8 race tail, as well as turn signal pods and a seat cowl. Give us a call and let us know what you need!

This bike was built by Crouse engineering. The bike's got a +10 Trac Dynamics swingarm. The photos to your left show the bike with our +6 Street tail section.

The photo on the bottom shows the same bike, (same +10 swingarm) with our +8 Race tail section.

Crouse says that a 240 rear tire fits nicely inside these tails. Fitting a 300 requires trimming on the bottom of the tail, especially when running a shock.

You'll find some bigger pictures in our customer gallery.

2GSX134S
Suzuki GSX 1300 Hayabusa Street tail - stock length
Replacement tail section for your Busa. Will work with stock turn signals and seat cowl. Taillight is easily cut out for street applications.

Price

2GSX134
Suzuki GSX 1300 Hayabusa Race tail - stock length

This is a one piece tail that seamlessly incorporates the seat cowl and turn signals. The taillight and blinkers are easily cut out for street applications. Order yours today!

Price

2GSX134S6S
Suzuki GSX 1300 Hayabusa Street tail +6

Airtech has done it again! This is by far the best looking stretched tail section for the '08 Busa you can get your hands on. All the style lines were retained, nothing was squared off or simplified like some of the other hack jobs you see out there. It will even work with the stock seat cowl (just use some spacers on the hardware)! The taillight and blinkers are easily cut out for street applications. We think this tail section actually looks better than the stock one, because it's sleeker and doesn't look so stubby. Order yours today!

Price

2GSX134S6
Suzuki GSX 1300 Hayabusa Race tail +6
Like the +6 street, but with the seat cowl molded in so it's all one piece. All the style lines were retained, nothing was squared off or simplified like some of the other hack jobs you see out there. We've even filled and smoothed the cut out for the left hand passenger peg hanger, ain't that slick huh?

The taillight and blinkers are easily cut out for street applications.

Best looking stretched tail out there, no doubt... Order yours now!

Price

2GSX134S8
Suzuki GSX 1300 Hayabusa Race tail +8

This 8 over tail section is sexy as hell... Look at all those curves and that detail! We've even filled and smoothed the cut out for the left hand passenger peg hanger, ain't that slick huh?

The taillight and blinkers are easily cut out for street applications.

Order yours today!

Price

2GSX134TSR
Suzuki GSX 1300 Hayabusa Turn signal pod - right

Price

2GSX134TSL
Suzuki GSX 1300 Hayabusa Turn signal pod - left

Price

2GSX135
Suzuki GSX 1300 Hayabusa Solo seat cowl

This is a replacement seat cowl for your Busa. Mount this by removing the hardware from your old, busted, scratched seat hump and epoxy it to the inside of this lightweight fiberglass piece.

Price

Land Speed "B" Version - New!
 

Are you ready to take your Busa to the next level? This body picks up where the world record setting, "A" generation of Hayabusa land speed bodywork leaves off... This "B" version bodywork is significantly more slippery, has a decreased air trap in fork opening, a bigger pocket for the rider and can be mounted to the stock first gen Hayabusa fairing bracket and subframe with minor modifications.

Please note: These parts were developed on a gen 1 (1999-2007) frame, brackets and subframe. They'll fit a gen 2 ('08 & up) with some modification.

GSX13LSRB1
Hayabusa Land Speed Fairing "B"- Upper
This fairing is a highly modified Hayabusa superbike fairing. The nose was brought forward and down, sides were extended, handcuff blisters added, windscreen area extended, radiator opening decreased with a single goal in mind: flat out speed.
Yet, it still uses stock airducts (although we recommend our high flow ducts) and stock first generation Hayabusa upper fairing bracket.

Please note: Fairing is supplied scribed for the extended windscreen that is available through Airtech, we leave cutting to you so you can position to your preference or cut for custom windscreen.

Price

GSX13LSRBT
Hayabusa Land Speed Fairing "B"- Turbo Upper
This is the turbo version of the LSR "B" fairing. The nose was brought forward and down, sides were extended, handcuff blisters added, windscreen area extended, radiator opening decreased with a single goal in mind: flat out speed.
Yet, it still uses the stock stock first generation Hayabusa upper fairing bracket.

Please note: Fairing is supplied scribed for the extended windscreen that is available through Airtech, we leave cutting to you so you can position the screen to your preference or cut for custom windscreen.

Price

GSX13LSRB1
Hayabusa Land Speed Fairing "B"- Lower fairing / belly pan
Special belly pan that is specifically designed to work with the Hayabusa GSX13LSRB1 upper and GSX13LSRB3 tail section. It stretches all the way to the back tire and buttons to both the front fairing and the seat.

Price

GSX13LSRB3
Hayabusa Land Speed Fairing "B"- Tail section
The next generation of the Charlie Toy tail specifically for the Hayabusa chassis. Mounts to stock seat bracket on gen1 subframe and requires only removal of a few tabs to mount. We have a support bracket available to support rear of tail section and stash your electronics.

Fully enclosed rear wheel, can be cut & trimmed as needed for different classes. Tail section ends 9" back from axle in farthest forward adjustment (stock swingarm).

Please note: This tail section was developed on a gen 1 subframe. They'll fit a gen 2 with some modification or you can use a first gen subframe.

Price

GSX13LSRB5
Hayabusa Land Speed "B"- Seat support bracket and elctronics tray
Simplifies mounting of the GSX13LSRB3 tail section onto a lightly modified gen 1 Hayabusa subframe.

Price

GSX13LSREB
Hayabusa Land Speed "B"- Exhaust bulge
Good starting point if you are using a sidewinder/turbo dump pipe on the right side of the fairing. Cutting, trimming and other modifications should be expected as no two pipes are the same.

Price

GSX13LSR4
Hayabusa LSR front fender "A"
NEW! This is a highly modified Hayabusa fender. There's a return lip along the bottom edge that comes back to the tire (requires trimming for clearance). Our most slippery Hayabusa fender to date!

More pics

Price

 

 

 


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSX1300R HAYABUSA 2008-'14
2GSX134
SUZUKI GSX 1300R HAYABUSA TAIL SECTION - RACE STOCK LENGTH
$265.00
2GSX134S
SUZUKI GSX 1300R HAYABUSA TAIL SECTION - STREET STOCK LENGTH
$265.00
2GSX134S6
SUZUKI GSX 1300R HAYABUSA TAIL SECTION - RACE +"6
$328.00
2GSX134S6S
SUZUKI GSX 1300R HAYABUSA TAIL SECTION - STREET +"6
$328.00
2GSX134S8
SUZUKI GSX 1300R HAYABUSA TAIL SECTION - RACE +"8
$328.00
2GSX134TSL
SUZUKI GSX 1300R HAYABUSA TURN SIGNAL POD LEFT
$41.50
2GSX134TSR
SUZUKI GSX 1300R HAYABUSA TURN SIGNAL POD RIGHT
$41.50
2GSX135
SUZUKI GSX 1300R HAYABUSA SOLO SEAT COWL
$41.50
GSX13LSRB1 HAYABUSA LANDSPEED UPPER "B" $595.00
GSX13LSRBT HAYABUSA LANDSPEED UPPER - TURBO VERSION "B" $595.00
GSX13LSRB2 HAYABUSA LAND SPEED BELLY PAN "B" $410.00
GSX13LSRB3 HAYABUSA LSR SEAT "B" $925.00
GSX13LSRB5 HAYABUSA LSR "B" SEAT SUPPORT BRACKET / TRAY $85.00
GSX13LSREB HAYABUSA LSR "B" EXHAUST BULGE $85.00
GSX13LSR4 HAYABUSA LSR FRONT FENDER "A" $182.99

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices

Looking for some Suzuki GSXR fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!