YOSHIMURA F1 1988-'92

All Prices are listed at the bottom of the page

Back in 91' Airtech was instrumental in getting the AMA to allow different styled bodywork to be used in the Superbike classes. Due in part to our petitions to the AMA Airtech was able to design new bodywork for several different factory teams.

The whole assembly was used by Yoshimura at the end of the 91' season and on some of their Formula 1 bikes.

In the old catalogue pictures with the girls, there's a '91 fairing on the left and a '92 version is shown on the right.

This stuff is perfect if you are restoring a Yoshimura F1 or building your own GSXR replica version. We campaigned for this bodywork. It worked, and it will look gorgeous on your GSXR!

Will fit the following models:
GSXR750 1988-'92

GSXR1100 1989-'93

Takes a special windscreen and custom bracket - see price list below.

 

 

Ever heard of UFO? The "Unlimited Flying Object" was a popular series of articles in the then new Sportbike Rider magazine. We're talking '92 or so. Each issue, they would pit several street bikes against each other in three different shoot outs: LACR drag strip, Willow Springs Raceway and the Honda test facility in the Mojave desert. Builders could submit their bikes to the magazine editors for consideration. Bikes had to be street legal (lights etc.) and could not overheat, they actually had to drive around for 10-15 mins on the street right before the start of the competition. Several UFO bikes used the F1 assembly and Sims & Rohm took theirs to 208 mph - check out the pic with the girl in the pink bikini!

YF11
Yoshimura F1 GSXR750 Upper fairing
This is one of the most beautifully designed sculpted fairings made for the GSXR. The upper has 4 sharp louvers in the sides to ventilate radiator heat out of the bike. Intake ducts route air through internal ducting back to the air box.

Takes a special windscreen and custom bracket - see price list below.

Price

 

YF12
Yoshimura F1 GSXR750 Lower fairing
Our one piece lower affixes easily and has several vents in it that pull hot air out of the engine compartment.

Price

YF13
Yoshimura F1 GSXR750 Tail section

Our distinctive Yosh F1 race seat was titled "the big butt seat" by some, at the time. Truth was, it was designed in a fashion that reattaches the air behind the motorcycle, which reduces drag.

Price

YF14
Yoshimura F1 GSXR750 Under seat enclosure

For underneath the tail section, we make an anti-draft shield that bonds under the subframe and controls the turbulent air swirling around the rear tire.

Price

2YF11
Yoshimura F1 GSXR750 Upper fairing
This particular fairing was the second version of the F1 fairing used by Yoshimura and several other teams throughout the 92' Formula USA season. The fairing has a low-slung, raked nose and two large radiator vents on the side of the fairing.
The front radiator shroud was extended back towards the radiator itself to help avoid high pressure bleed off and improve cooling.
All the duct works were filled in to smooth air flow.

Takes a special windscreen and custom bracket - see price list below.

Price

 

2YF12
Yoshimura F1 GSXR750 Lower fairing
This is the lower belly pan that fits the 2YF11 Yoshimura F1 upper fairing. This lower is smooth and does not have the naca duct for the dry clutch - we removed it because it didn't need it, and it improved the air flow.

Price

2YF13
Yoshimura F1 GSXR750 Tail section

We also made a slimmer, sleeker race seat. See below for the undertail.

Price

2YF14
Yoshimura F1 GSXR750 Under seat enclosure

This anti-drag shield helps control turbulent air around the rear tire - and it looks bitchin' to boot.

Price

YGSXR75
Yoshimura F1 GSXR750 Front fender

For KYB fork only.

Price

YGSXR76
Yoshimura F1 GSXR750 Rear fender / hugger

Fits "Kit" braced swingarm only.

Price

2GSXRST
Suzuki GSXR750 Fuel tank - Sprint

This is a slammed style race fuel tank for your GSXR. You can save a grip of weight off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

2GSXR710
Suzuki GSXR 750 Yoshimura carb covers

These carb covers are almost impossible to find, but we have them.

These covers are easily installed onto your chassis with pop rivets or zip ties.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
YOSHIMURA F1 1988-'92
YF11 YOSHIMURA F1 SUPERBIKE UPPER '91 $394.22
YF12 YOSHIMURA F1 SUPERBIKE LOWER / BELLY PAN '91 $207.48
YF13 YOSHIMURA F1 TAIL SECTION SUPERBIKE '91 $228.24
YF14 YOSHIMURA F1 UNDER SEAT ENCLOSURE '91 $85.63
2F11 YOSHIMURA F1 SUPERBIKE UPPER '92 $394.22
2YF12 YOSHIMURA F1 SUPERBIKE LOWER / BELLY PAN '92 $207.48
2YF13 YOSHIMURA F1 TAIL SECTION SUPERBIKE '92 $228.24
2YF14 YOSHIMURA F1 UNDER SEAT ENCLOSURE '92 $85.63
2GSXRST YOSHIMURA SPRINT RACE FUEL TANK $687.63
YGSXR75 YOSHIMURA FRONT FENDER - KYB FORKS ONLY $76.08
YGSXR76 YOSHIMURA REAR SWINGARM FENDER- "KIT" BRACED ARM ONLY $89.95
2GSXR710 YOSHIMURA CARB COVERS $82.99
RGVR1BK FAIRING BRACKET - FRONT STAY ONLY (RGVR-F1) $225.00
RGVR7 WINDSCREEN - SMOKE (RGVR-F1) $99.95

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices