 |
| 
|
So
you own an old airhead, huh? Cool bike! If your looking for some
wind protection in the shape of a quarter fairing, you've come
to the right place!
We also make a beautiful cafe seat.
This is the original seat, sculpted by our head designer Kent
Riches, that some weasel knocked off and is now selling on Ebay
from his garage in Bumfuck, CO. No it is not a "Knoscher"
or "Rennsport" seat nor are they the original designer.
It was actually based on a Ducati 900 SS seat and we spent many
hours modifying it and molding it into this cool tail before they
knocked it off. Thank you.
We also have full sized and bobbed
front and rear fenders, dash panels to hold your clocks, a 10
gallon fuel tank, a cafe style half fairing and even a competition
upper if you're crazy enough to race one of these bad boys... |
| 
|
Airhead
owners get all the chicks... |
| 
|
| A great
example of what is possible with our parts. Jim Conachen used our
Ducati 900SS half fairing, BMW cafe seat and bobbed front fender
to build this clean special. |
| 
|
R90S
BMW R90S cafe quarter fairing - 8"
BMW R90 quarter fairing, but will fit other models as
well. 8.5" opening for the oversized BMW R-series headlight
(tapers from 8.5" at the face to 8.25"). This is a sleek
version without turn signal mounts.
We recommend installation with the dash panel (R90S2,
see below). Stock windscreens will be a little long in the back
when installed without a dash and may require trimming.
Price |
| 
|
R90S7
BMW R90 cafe quarter fairing - 7"
BMW R90 quarter fairing, modified to accept a standard
7" bulb.
We recommend installation with the dash panel (R90S2,
see below). Stock windscreens will be a little long in the back
when installed without a dash and may require trimming.
Price |
| 
|
R90S2
BMW Dash panel for R90S and R90S7 quarter fairing
This dash panel is sandwiched between the fairing and
the windshield. The windscreen screws will pass through the windscreen,
a rubber washer, trhe dash and the fairing. This is why stock
windscreens will be a little long in the back when installed without
a dash and may require trimming.
Price |
| 
|
R90SC
BMW Competition quarter fairing
Are you racing your airhead? You need one of these!
Price |
| 
|
R90ST
BMW R90S Quarter fairing with turn signal mounts
BMW R90 replacement quarter fairing, but will fit other
models as well. 8.5" opening for the oversized BMW headlight
(tapers from 8.5" at the face to 8.25"). This is the
version with turn signal mounts.
We recommend installation with the dash panel (R90ST2,
see below). Stock windscreens will be long in the back when installed
on a fairing without the dash and may require trimming.
Price |
| 
|
R90ST2
BMW Dash panel for R90ST quarter fairing
This dash panel is sandwiched between the fairing and
the windshield. The windscreen screws will pass through the windscreen,
a rubber washer, trhe dash and the fairing. This is why stock
windscreens will be a little long in the back when installed without
a dash and may require trimming.
Price |
| 
|
R90SWS
BMW R90S Windscreen - smoke
Stock size, dilled. Fits stock R90S fairing and all variations
above. Windscreens may be a little long in the back when installed
without a dash and may require trimming.
Price |
| 
|
CCF
Classic cafe 1/2 fairing
This sculpted cafe half fairing has fairly tall windscreen
height to use either clubman or low BMW style handlebars.
Price
|
| 
|
BBMW1
50's BMW Rennsport style fly screen
Headlight opening 7"
Price
|
|
DUC91
Ducati 900 SS Half fairing - 8" opening
We offer this replacement fairing with the larger headlight
opening, so teh chrome ring on the headlight will protrude.
Price |
|
DUC917
Ducati 900 SS Half fairing - 7" opening
This half fairing has a smaller, 7" headlight opening
with a return lip that butts up against the lens of a standard
7" automotive bulb.
Price |
|
DUC91C
Ducati 900 SS Half fairing - competition
Lastly, we have a competition version for you racers
out there who don't need no stinkin' headlight at all.
This is also a cool fairing for those who want to install some
unobtrusive projector beam headlights for that replica racer look
while keeping the bike streetable.
Price |
| 
|
BMWRSS1
BMW Cafe seat with roundel mount
Classic Rennsport style seat with a recessed spot on
the tail for a BMW roundel. The seat comes with an aluminum bracket,
that you will have to mount inside the back of the tail with some
5-minute epoxy (available from any hardware store) so it attaches
to the accessory mount in the back. We used to glass these mounts
into the back of the tail but have noticed the mount on the bike
can be off by as much as 1/4", so it's better if you do it
yourself, so you can mount the seat perfectly straight.
We also offer two different styles of seat pans,
for use with both short and long tanks, see below.
Larger
photo
Price |
| 
|
BMWRSS2
BMW Cafe seat without rondel
Classic Rennsport style seat with a smooth rear hump.
The seat comes with an aluminum bracket, that you will have to
mount inside the back of the tail with some 5-minute epoxy (available
from any hardware store) so it attaches to the accessory mount
in the back. We used to glass these mounts into the back of the
tail but have noticed the mount on the bike can be off by as much
as 1/4", so it's better if you do it yourself, so you can
mount the seat perfectly straight.
We also offer two different styles of seat pans,
for use with both short and long tanks, see below.
Larger
photo
Price
|
| 
|
BMWRSSUPS
BMW Cafe Rennsport seatpan - short
This upholstery pan fits our Rennsport cafe seats. It
kicks up in the front area to hide the unsightly gap in the back
of the tank where the tank mounting bolts live. This is the short
seatpan, to work with the longer R90S style fuel tanks.
Length: 16.25"
Please note: does not fit BMWRSS3 - RS54
style seat
Price |
| 
|
BMWRSSUPL
BMW Cafe Rennsport seatpan - long
This upholstery pan fits our Rennsport cafe seats. It
kicks up in the front area to hide the unsightly gap in the back
of the tank where the tank mounting bolts live. This is the long
seatpan, to work with the short style fuel tanks Tanks that are
definitely short, to our knowledge:
- toaster tanks
- tanks with rubber knee pads
Length: 18"
Please note: does not fit BMWRSS3 - RS54
style seat
Price |
| 
|
BMWRSS3
BMW Cafe Rennsport seat
This Rennsport seat was inspired by the RS54. It's designed
to work with a shortened subframe that is cut behind the shock
mounts. The cool thing is the subframe just bolts onto R models
so you could pick up a spare sub section and modify it.
We've removed the skirt notching (as seen on the
seats above) that clears the frame tabbing for a cleaner look.
You can trim this seat to suit.
Price |
| 
|
BMWR1
BMW Front fender - stock length
Long /5 style front fender. Fits '70-'73 R50/5, R60/5 and R75/5.
Larger
photo
Price |
| 
|
BMWR1M
BMW front fender - short
Short /5 style front fender. Fits '70-'73 R50/5, R60/5
and R75/5.
Larger
photo
Price |
| 
|
BMWR2
BMW Rear fender
R-series rear fender
Larger
photo
Price |
| 
|
BMWR3
BMW Front fender - stock length
Fits all 74-84 BMW boxers except the following models: R65, R80GS
and R80ST.
Larger
photo
Price |
| 
|
BMWR3M
BMW Front fender - short
Same style lines and mounting points, but shortened 3" on
both ends so 6" shorter overall.
Fits all 74-84 BMW boxers except the following models:
R65, R80GS and R80ST.
Price |
 |
You can see clearly
see how much shorter the bobbed fender is in the picture on the
left. |
| 
|
VSB1
BMW saddle bags with roundel mounts
These saddle bags have roundel mounts and turn signal
mounts. We make the same bag without the mounting spot for the
turn signals - VSB2 below. Set includes both bags with lids. No
hardware included.
Roundel mounting surface: approx. 2.5"
Turn signal mounting surfac: approx 2.5"
Originally BMW bags but will fit many applications.
More pics
Price |
|
|
VSB2
BMW saddle bags without roundel mount
These saddle bags are identical to the VSB1 but without
the roundel mounts. Set includes both bags with lids. No hardware
included.
Turn signal mounting surfac: approx 2.5"
Originally BMW bags but will fit many applications.
Price |
|
|
BMWBT
BMW Fuel tank -10 gallon
Large Heinrich style touring tank for all you Iron
Butts.
** Currently not available. Pricing to be determined.
**
Price
|
