 |
| 
Buell RR1000
|
Erik Buell started his engineering career at Harley
Davidson, but left H-D to pursue an opportunity to market Buell
Motor Company 750cc two stroke racebikes to privateer teams
competing in the AMA Formula 1 series. The race bike stint was
short lived, as the AMA discontinued the series in favor of
Superbike less than a season later.
Buell then turned to street bikes. He obtained a large quantity
of XR1000 motors via his contacts at H-D, and he used these
to create the RR1000 Battletwin. Between 1987 and 1988, Buell
delivered 50 bikes to customers, placing the Buell Motor Company
on the map.
|
|
Buell RR1200
|
When his supply
of XR1000 motors ran out, Buell adopted the new H-D 1200cc Evolution
engine, upgrading the bike and making the necessary changes to
package the new powerplant. Through the 1989 model year, Buell
created an esitmated 65 RR1200 bikes.
Airtech has fairings for both models, and even some hard to find
race stuff!
|
 |
Don McCaw at the
Bonneville salt flats on his land speed RR1200 circa 1991/92.
We have the racing lowers and matching lower tail panels as used
on this bike and Battle of the Twins racers.
|
|
 BRR1S
Buell RR1000 RR1200 Upper fairing- street
Replacement upper with headlight opening.
Price |
|
 BRR2A
Buell RR1000 Lower fairing - right
This is the replacement right lower fairing for your
Buell RR 1000. It is different from the RR 1200 right lower fairing.
The RR1000 lower does NOT have a large duct opening in it.
Price |
|
BRR2B
Buell RR1200 Lower fairing - right
This is the replacement right lower fairing for your
Buell RR 1200. It is different from the RR 1000 right lower fairing.
The RR1200 lower fairing has a large duct opening in it.
Price |
|
 BRR3
Buell RR1000 RR1200 Lower fairing - left
This is the replacement left lower fairing for your Buell
RR 1000 or RR1200. The left side lower fairing for both models
is the same. The inside duct BRR3D is sold separately - listed
below.
Price |
|
BRR3D
Buell RR1000 RR1200 Lower fairing - inside duct
This is the inside duct for BRR3.
Price |
| 
|
 BRR4
Buell RR1000 RR1200 Tail section
This is the replacement tail section for your Buell RR 1000 or
RR1200.
Price |
| 
|
 BRR4P
Buell RR1000 RR1200 Underseat enclosure
This is underseat enclosure for the tail section for your Buell
RR 1000 or RR1200. It can be bonded into the tail section and
creates a storage compartment in the tail, accessible by lifting
up the upholstery pan BRR4UP listed below.
Price |
| 
|
BRR4UP
Buell RR1000 RR1200 Upholstery pan
This is upholstery pan for your Buell RR 1000 or RR1200.
Price |
| 
|
 BRR4LP
Buell RR1000 RR1200 Upholstery pan
This is license plate bracket for your Buell RR 1000 or RR1200.
Price |
|
BRR5
Buell RR1000 RR1200 Lower tail fairing - right
This is the replacement right lower tail fairing for
your Buell RR 1000/1200. This filler panel fits behind the foot
controls and connects the lower fairing to the tail section.
Price |
|
BRR6
Buell RR1000 RR1200 Lower tail fairing - left
This is the replacement left lower tail fairing for your
Buell RR 1000/1200. This filler panel fits behind the foot controls
and connects the lower fairing to the tail section.
Price |
|
 BRR7A
Buell RR1000 RR1200 Front fender - front part
Replacement front fender part. This is the front half of the 2-piece
front fender on the RR1000 and RR1200.
Price |
|
BRR7B
Buell RR1000 RR1200 Front fender - rear part
Replacement front fender part. This is the rear half of the 2-piece
front fender on the RR1000 and RR1200.
Price |
 |
 BRR8
Buell RR1000 RR1200 Fuel tank
This is a replacement fuel tank for the Buell RR1000 and RR1200.
The stock tank on your RR was made out of fiberglass as well and
by now modern fuel has probably tore up the inside causing all
kinds of problems. Airtech can help you by making a brand new
tank. We can epoxy coat the inside of your new tank to prevent
future problems. Please ask your sales rep when placing the order!
More
photos
Please note! This gas tank is not recommended
for street use, this is a fiberglass gas tank that will not dent.
In the event of a crash, the gas tank may rupture and spill fuel
possibly catching your motorcycle on fire. This gas tank is recommended
for racing purposes, with racing fuel only!
Read more...
Price |
|
|
Don McCaw at the
Bonneville salt flats on his land speed RR1200 circa 1991/92.
We have the racing lowers and matching lower tail panels as used
on this bike and Battle of the Twins racers.
|
|
BRR2LSR
Buell RR1000 RR1200 Land Speed Lower fairing - right
This is the land speed right lower fairing for your Buell
RR 1000/1200. This is the right side of the race lowers as used
on Don McCaws record setting Buell RR and on Battle of the Twins
racers. These lowers come into a point towards the front tire
unlike the stock lowers. Requires matching lower tail panels listed
below.
Price |
|
BRR3LSR
Buell RR1000 RR1200 Land Speed Lower fairing - left
This is the land speed left lower fairing for your Buell
RR 1000/1200. This is the left side of the race lowers as used
on Don McCaws record setting Buell RR and on Battle of the Twins
racers. These lowers come into a point towards the front tire
unlike the stock lowers. Requires matching LSR lower tail panels
listed below.
Price |
|
BRR5LSR
Buell RR1000 RR1200 Land Speed Lower tail fairing - right
This is the matching land speed right lower tail fairing
for your Buell RR 1000/1200. This filler panel fits behind the
foot controls and connects the lower fairing to the tail section.
Only fits BRR2LSR.
Price |
|
BRR6LSR
Buell RR1000 RR1200 Land Speed Lower tail fairing - left
This is the matching land speed left lower tail fairing
for your Buell RR 1000/1200. This filler panel fits behind the
foot controls and connects the lower fairing to the tail section.
Only fits BRR3LSR.
Price |
