RSS1200 1991-93 FAIRINGS, FUEL TANK, TAIL

All Prices are listed at the bottom of the page


	BM26 Buell RSS1200 Sprocket cover This is an Air-Tech design sprocket cover for the sportster motor Buells. This cover actually covers the contours of the can cover on the sportster motor and looks way cool. It looks a lot better than the stock Buell plastic crap. This piece is available in fiberglass and carbon fiber. Call our sales reps today! Price
	BRSS121C Buell RSS1200 Competition upper Identical in exterior shape to the street upper fairing with the exception that the headlight holes and turn signal holes have been filled in for race purposes. Price
	BRSS121S Buell RSS1200 Street upper This is a direct replacement part for the RSS1200. Simply drill the mounting holes, sand, paint, and install. Price
	BRSS122 Buell RSS1200 Right side panel This is the piece that mounts to the fairing below the gas tank. As you can see from the picture the oval air filter cover has been filled in because a lot of guys use it as an S & S tear drop air filter cover. This allows you to cut and trim to fit around whichever air filter cover you're using. Or cut it open, if you're using a stock one, for an accurate restoration. Price
	BRSS123 Buell RSS1200 Left side panel This is the left side panel that mounts to the fairing and fits below the gas tank in front of the seat sides. To replace this piece simply drill the mounting holes, paint, and install. Price
	BRSS124 Buell RSS1200Tail section This is a direct replacement tail section for the RSS. These parts aren't available from Buell anymore, but they are available from us. If you're replacing crash damaged or want to restore an RSS give us a call, we've got the parts that you need. Price
	BRSS125 Buell RSS1200 Rear fender: This is the rear fender license plate bracket for your RSS. Sold in fiberglass but is also available in carbon fiber. Price
	BRS126 Buell RSS1200 Fuel tank Modern pump gas tears up fuel tanks, especially those old fiberglass tanks like on your Buell. So if you've had gas sitting in your bike for all of these years, chances are that your tank is a goner. We put a factory ethanol resistant epoxy coating in our tanks, and have sold quite a few of these to people who are in the exact situation you're probably in. Need a replacement tank for your Buell? We've got what you need. Give us a call today! Price Please note!!!! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent!!!! It is possible that the gas tank will rupture and spill fuel possibly catching your motorcycle on fire if you happen to crash on the street. This lightweight racing gas tank is recommended for racing purposes only!!!!
	BRS127 Buell RSS1200 Right side filler panel that goes between the tail section and fairing assembly. Price
	BRS128 Buell RSS1200 Left side filler panel that goes between the tail section and gas tank, and it mounts below the upholstery. Price
	BRS129 Buell RSS1200 Front fender This is an exact replica of the RS and RSS Buells. Simply drill the mounting holes, mount onto your bike and go for a ride! As you can see we sell this fender in fiberglass but it is also available in carbon fiber call your sales rep for a price in carbon today. Price
	BRS1210 Buell RSS1200 Dash panel the picture shows this dash mantle upside down, but this is actually the right part you need for your RS1200. Stock fiberglass pieces are brittle and break easily our lightweight fiberglass piece is a direct replacement. Simply drill the mounting holes, mount it onto your chassis, and go riding. Price

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Price
RSS1200 1991-93
BRSS121C	BUELL RSS1200 UPPER-COMPETITION	$224.72
BRSS121S	BUELL RSS1200 UPPER-STREET	$248.98
BRSS122	BUELL RSS1200 FAIRING SIDE-RIGHT	$127.88
BRSS123	BUELL RSS1200 FAIRING SIDE-LEFT	$127.88
BRSS124	BUELL RSS1200 SUPERSPORT TAIL PIECE	$247.00
BRSS125	BUELL RSS1200 LICENCE PLATE FENDER	$107.88
BRS126	BUELL RSS1200 FUEL TANK	$824.40
BRS127	BUELL RSS1200 FUEL TANK SKIRT-RIGHT	$87.02
BRS128	BUELL RSS1200 FUEL TANK SKIRT-LEFT	$87.02
BRS129	BUELL RSS1200 FENDER-FRONT	$99.59
BRS1210	BUELL RSS1200 DASH PANEL	$99.59

To order call 760-598-3366 NOW!