 |
| 
|
The
Buell S1 Lightning is a sweet ride. Cramming a stonkin' V-twin
in a nimble chassis is a recipe for good times.
Not only do we make replacement fairings for the
S1, we've also designed a performance airbox and an oil containment
bellypan for all you track guys.
|
 |
We didn't stop there
though, 'cause this bike has just about the perfect attitude for
a streetfighter conversion, so we whipped up a really cool solo
tail, dubbed the 'Manta', and fit our 'Rogue' dual headlight fairing. |
|
Don't
forget to check out the VR1000 styled Superbike fairing, and the
GP style full fairing we developed for the S1!
Or, you can mix and match like the customer on the left did! |
| |
 |
 BS11
Buell S1 Lightning Fly screen
Replace your little bikini fairing on your BS1 with our
lightweight fiberglass piece also available in carbon fiber. Call
one of our sales reps today!
Price
|
 |
BS11C
Buell S1 Lightning Competition fairing
These were very popular when they were racing the Buells
in the Lightning series. But is also a real cool fairing for a
custom street application.
Price
|
|
BS1DH1
Dual headlight fairing
This is an original dual headlight fairing for the Buell S1 series
motorcycles. This is a cool design that has two projector beams
in it.
|
 |
BS1DH2
Dual headlight fairing 2
This fairing is the next generation dual headlight assembly. It
is basically the same and mounts the same as the BS1DH1 the only
difference is that there is a style line frenched in for a little
more of a stylish appearance. This has been a very popular fairing
for the Buells.
|
 |
 BS12
Buell S1 Lightning Tail section
Direct replacement for the S1 tail section. Simply drill
the mounting holes and mount onto your chassis.
Price |
 |
BS13
Buell S1 Lightning Air box cover
Direct replacement for the stock fuel, huge breadbox
air filter cover assembly. If you're restoring a Buell you'll
need one of these air boxes.
Price |
 |
 BS15
Buell S1 Lightning Rear fender
This was a large swinger fender that came stock on your
Buell S1's. It has a license plate bracket molded onto the back
of it just like stock. We made a lot of these in carbon fiber
for the Buell guys.
Price
|
 |
BS16
Buell S1 Lightning Belt guard
This is the lower rear belt guard for the steel swing
arm Buells.
Price |
 |
BS17
Buell S1 Lightning Rear Head Guard
This is a direct replacement for the rear for the heat shield that goes on the rear cylinder
head of your S1. Lightning replace that crusty burnt up old stock, cover with a fresh one
from us.
Price |
| 
|
 BS19
Buell S1 Lightning Front fender
This is the front fender that fits the inverter front forks.
Price
|
| 
|
BS110
Buell S1 Lightning Sprocket cover
This is a really cool fiberglass piece that replaces the plastic
sprocket cover on the Buell motor. You see, the plastic cover
warps really easy and looks really ugly. This fiberglass piece
is a lot sturdier and a lot of people purchase the carbon fiber
version that we make. Give our sales reps a call today!
Price |
 |
BM26
Buell S1 Lightning Sprocket cover
This is an Air-tech design sprocket cover for the sportster
motor Buells. This cover actually covers the contours of the can
cover on the sportster motor and looks way cool. It looks a lot
better than the stock Buell plastic crap. This piece is available
in fiberglass and carbon fiber. Call our sales reps today!
Price |
| 
|
BOCP1
Buell S1 Lightning Belly pan
This is an oil containment belly pan for the Buell tube chassis
bikes. Most racing organizations require oil containment and this
belly pan is race legal for most race organizations. Some fabrication
and brackets required.
Price
|
| 
|
BS1AB
Buell S1 Lightning Air box
This is a custom Air-tech design air box for the chassis
Buells. This sleek design screws directly onto the carburetor
assembly, has a reusable UNI-filter, and an air filter cover that
screws onto the back of the plate. This is a complete kit and
just requires some drilling and mounting, we also recommend rejetting
the carb since this air box flows considerably more air than the
stock breadbox does. Increase your performance and increase your
look. Get one of these air boxes today!
Price |
 |
 |
If
you're looking for a super aerodynamic fairing for your S1, Airtech
has what you need! We have designed beautiful bodywork fit for
a Grand Prix race bike!
Not only does this bodywork look
fast but also we are confident that this GP bodywork will produce
impressive landspeed records at the Bonneville. |
 |
BS1GP1
Buell S1 Lightning GP fairing kit
This sleek aerodynamic two-piece front fairing assembly features
a front air intake duct that pressurizes the air box assembly.
The radiuses around the front leading edge of the fairing are
aerodynamic and the lower belly pan will catch all of the Harley
fluids. Also included is the teardrop 'aero' seat. This seat is
guaranteed to close the envelope behind the rider. It has a complete
filled in anti-draft shield underneath the seat and utilizes the
stock seat pan, as well as, the stock turning signals and lights
for those who wish to run on the street.
This tail section will
not work with a Corbin seat.
This kit includes:
- upper fairing
- lower fairing
- windscreen
- mounting brackets
- tail section
- undertail
Price |
| 
|
BS1GP2
Buell S1 Lightning - GP tail section only
The GP tail section is sold seperately. It fits onto the S1 chassis
and utilizes the stock S1 upholstery. This tail section will fit
on S2, S3 and M2's with a little framework (shortening subframe),
but you must use the stock S1 upholstery.
This tail section will
not work with a Corbin seat.
Price |
 |
BS1GP3
Buell S1 Lightning Air box
This is an air box assembly that works with our Buell
GP fairing kit. The backing plate bolts onto the caburator assembly,
and the fairing assembly holds the air filter in place. A three-inch
round duct hose extends forward to the air duct in the front of
the fairing assembly. Get nice, cool, pressurized air into the
caburator assembly. A must if you are racing a tube chassis Buell
with a Grand Prix fairing assembly.
Price |
|
|
How would you like to make your
S1 look long, thin and fast? No Problem, Airtech has made your
dreams come true. Grafted from the factory Harley VR1000 Superbike
bodywork, this sleek bodywork will turn your Buell S1 in your
dream machine. One of the unique features to this one piece fairing
assembly includes air ducts that pressurize the air box assembly
to increase the top end speed. This one-piece frame mounted fairing
comes with brackets and windscreen. The rear one-piece tail section
is recessed at the end of the seat to hide the taillight and is
designed to utilize the stock S1 seat assembly, taillight and
turning signals. So if you are tired of your S1 looking like your
friends, give Airtech a call, we can help you out.
This kit includes:
- upper fairing
- windscreen
- mounting brackets
- tail section
- undertail |
 |
BS1SB1
Buell S1 Lightning Super bike fairing kit
If you want to dress up your naked Buell this fairing
assembly is what you want. This fairing is not as full coverage
as our Grand Prix fairing unit, this assembly exposes a little
bit of the motor out of the bottom. The fairing design was originated
from the factory Harley Davidson VR1000 road race bikes. Although
you may not be able to afford a VR1000 you can sure make your
Buell look like one. Give our sales reps a call today!
Price
|
 |
BS1SB2
Buell S1 Lightning Super bike race tail
This is the race tail assembly out of our super bike
fairing kit. This seat bolts onto the tube chassis Buells and
uses the stock S1 upholstery. This piece also comes with and under
seat enclosure.
This tail section will
not work with a Corbin seat.
Price |
| |
|
|
The
S1 just begs for a fighter conversion, it's already got the stance
and the attitude. You bring the bodywork! |
|
ROGUEF1
Buell S1 Lightning 'Rogue' fairing
This is an extremely cool street fighter style of fairing
assembly for your Buell motorcycles. Simply take off that huge
headlight and little bikini fairing and mount on our cool, new
design that has duel projector beam lights. This is a bitchin'
little fairing to mount on your street fighter. Get yours today!
Kit contains:
- fairing
- 2 headlights
- headlight bucket
- windscreen
- mounting hardware
Price |
| 
|
MANTA4
Buell S1 Lightning 'Manta' tail section
Just go ahead and admire how much smaller and sleeker this
tail section is than the bulky looking stock seat.
We also did a matching slick undertail with a license plate mount.
And it uses the stock S1 taillight.
And no, you won't be sitting on skimpy racing foam, we actually
went through the trouble of designing a beautiful molded seat
pad. What are you waiting for? Get one today!
Please note: This seat was designed for the M2 chassis.
It will physically fit onto an S1 but it will take a fairly focused
effort to do so because the mounting points are a little off.
If you are not afraid of a bit of fabrication it can definitely
be done!
Price
|
|
|
Please note these very important items!
- We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
- The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
- All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
- It is the purchasers' responsibility
to mount all of the products they purchase onto their
machine. If you need assistance mounting these products
call our sales reps for advice.
|
|
|
| BUELL
S1 LIGHTNING 1996-'98 |
BS11 |
BUELL S1 LIGHTNING UPPER - REPLACEMENT
¼ FAIRING |
$100.04 |
BS11C |
BUELL S1 LIGHTNING UPPER - COMPETITION
FAIRING 1/4 |
$120.04 |
BS12 |
BUELL S1 LIGHTNING TAIL SECTION - SUPERSPORT
|
$224.00 |
BS13 |
BUELL S1 LIGHTNING AIR BOX |
$116.18 |
BS15 |
BUELL S1 LIGHTNING FENDER - REAR SWING
ARM |
$136.18 |
BS16 |
BUELL S1 LIGHTNING LOWER REAR BELT GUARD |
$82.14 |
BS17 |
BUELL S1 LIGHTNING REAR HEAD COVER |
$74.70 |
BS19 |
BUELL S1 LIGHTNING FENDER - FRONT |
$99.59 |
BS110 |
BUELL S1 LIGHTNING SPROCKET COVER |
$74.70 |
| BS1AB |
BUELL S1 LIGHTNING AIR BOX- CUSTOM AIRTECH
DESIGN |
$217.74 |
| BOCP1 |
BUELL S1 LIGHTNING OIL CATCH PAN |
$165.98 |
| SUPERBIKE |
| BS1SB1 |
BUELL S1 LIGHTNING KIT - SUPERBIKE CONVERSION
WITH SUPERSPORT TAIL SECTION |
$1175.70 |
| BS1SB2 |
BUELL S1 LIGHTNING TAIL SECTION - SUPERBIKE
CONVERSION |
$320.10 |
| BS1SB3 |
BUELL S1 LIGHTNING AIR BOX KIT - SUPERBIKE
CONVERSION |
$187.74 |
| GP |
| BS1GP1 |
BUELL S1 LIGHTNING KIT - GP CONVERSION
|
$1175.70 |
| BS1GP2 |
BUELL S1 LIGHTNING TAIL SECTION - GP
CONVERSION |
$320.10 |
| BS1GP3 |
BUELL S1 LIGHTNING AIR BOX KIT - GP
CONVERSION |
$217.74 |
| STREETFIGHTER |
| ROGUEF1 |
BUELL S1 LIGHTNING "ROGUE"
BICLOPS FAIRING KIT |
$381.77 |
| MANTA4 |
BUELL S1 LIGHTNING "MANTA" TAIL
SECTION |
$394.80
|
|
To order call 760-598-3366 NOW!
Home
| About Our Products
| Copyright
| Prices
|