DGPR1C Derbi GPR50 Competition upperfairing
If you're racing your little GPR50 you're going to need one of
these upper fairings. The headlight holes and turn signal holes
have all been filled in for race purposes, and is legal for most
racing organizations. Get yours today!
DGPR1S Derbi GPR50 Street upper fairing
This is a replacement upper for your GPR50 race replica street
bike. Replace crash damaged bodywork or replace that heavy plastic
with our lightweight fiberglass.
DGPR2 Derbi GPR50 right lower fairing
Replace those heavy plastic lowers with our lightweight fiberglass.
It mounts to all of your existing stock brackets and use your
stock hardware. This piece will lighten up your race 50.
DGPR3 Derbi GPR50 left lower fairing
Replace those heavy plastic lowers with our lightweight fiberglass.
It mounts to all of your existing stock brackets and use your
stock hardware. This piece will lighten up your race 50.
DGPR4 Derbi GPR50street tail
This is a replacement piece for the GPR50 race replica tail section.
This seat has an open seat pan cut out so you can use your stock
upholstery and had the passenger provision cut open for access
to your fuel tank. This is a lightweight replacement for the heavy
stock pieces.
DGPR4S Derbi GPR50 Superbike race tail
If your seriously racing your GPR50 you need one of these race
tails. There is a flat seat pan used for lightweight closed race
foam and the passenger provision has been removed and the solo
seat cowl is molded into it for a clean race tail section. The
side area is large enough for number plates and is a race legal
tail section for most racing organizations. If you're racing a
bike you need one of these tails. Call one of our sales reps today!
DGPR6 Derbi GPR50 Front fender
Replace your heavy plastic fender with this lightweight fiberglass
fender. Simply drill the mounting holes and mount it onto your
front forks. This removes a lot of weight off of your front end
so that your suspension reacts faster so that you have better
control. Improve the handling of your bike with this front fender.
Give our sales reps a call today!
DGPR7 Derbi GPR50 rear swingarm fender
Replace your heavy black plastic rear fender with this lightweight
fiberglass piece. Your suspension will react faster without all
of that extra weight. Custom color match you parts to match the
rest of the paint scheme on your chassis. This part is available
is carbon fiber as well. Talk to one of our sales reps today about
the price.
DGPR8 Derbi GPR50 Fuel tank shell
Replace you heavy stock plastic fuel tank with our lightweight
fiberglass piece. Passenger provisions in front for mounting the
stock hinge assembly. If you are racing your GPR you need one
of these tank shells.
DGPR9 Derbi GPR50 Headlight surround
This is the piece that goes around the headlight assemblies that
fits inside of your stock plastic. This piece used to be that
fake looking carbon fiber. This lightweight fiberglass piece allows
you to custom color match the rest of your chassis or this piece
is available in REAL carbon fiber. Call one of our sales reps
for a price today!
DGPR10 Derbi GPR50 Under seat enclosure
This piece replaces all that plastic crap underneath your tail
section. This lightweight fiberglass piece is easily painted to
match the color of the rest of your body or is available in carbon
fiber. Call our sales reps today!
We sell an unfinished unpainted
product, it is your responsibility to sand, finish,
and paint the parts you buy from us.
The parts we sell are un-drilled;
it is your responsibility to drill all of the mounting
holes and fit the parts onto your chassis.
All of our parts may or may not
include the internal mounting tabs. Please consult
with our sales representative if you have any questions
about mounting things like headlights and dashes.
It is the purchasers’ responsibility
to mount all of the products they purchase onto their
machine. If you need assistance mounting these products
call our sales reps for advice.
DGPR1C
DGPR2
DGPR3
DGPR4
DGPR4S
DGPR6
DGPR7
DGPR8
DGPR10