DSC11C1P
Ducati Sport Classic half fairing - Competition, one piece
Corsa half fairing. Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S.

Will fit the other models ('06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.

The mounting brackets underneath the gas tank are fairly simple (see pic). It's just a little zig zag bracket that is sandwiched between the tank mounting cups and the frame. You should be able to make your own!

Price

DSC11S1P
Ducati Sport Classic half fairing - Street, one piece
One piece version of the stock Paul Smart half fairing that integrates the upper fairing and the standard, short side fairings into one piece.

The parting seam and turn signal mounts have been eliminated.

Will fit the other models ('06 Sport, GT and Biposto) with a Paul Smart/aftermarket front fairing bracket.

Price

DSC14
Ducati Sport Classic tail section - competition
Fits all Sport Classics including GT. Fabrication of rear mount required (see picture).

Overall length: 23.5"
Seatpan length: 9" (flat part)
Front width 7.5"
Widest point 15"

Price

DSC16
Ducati Sport Classic rear fender
Cool rear fender with short integrated chain guard. Fits all monoshock models - Sport Classic, Sport 1000S and Paul Smart. Does not fit twin shock GT1000. Also available in carbon fiber, ask your sales rep for a price!

Price

We've worked hard to make the rare Paul Smart or 1000S lower fairings available at a resonable price, we've seen sets go for $2000 on Ebay.

These lower fairings will mount to your stock Paul Smart or Sport 1000S upper fairing or to our replacement or track fairing. They do not work with the one-piece "Thunderduc" Corsa fairing above.

You will have to make 4 simple brackets, we've measured them and made drawings to make this easy for you, see below PDF files:

OEM Ducati Installation instructions (scan)

Right, rear bracket (#1 in Ducati instructions)

Right, front bracket (#2)

Left, front bracket (#3)

Left, rear bracket (#4)

DSC11C
Ducati Sport Classic half fairing - competition
This is the stock Paul Smart fairing with the headlight opening filled in for track use. You can install it with the stock, short side fairings or with the long Paul Smart LE lowers listed below.

Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S. Will fit the other models ('06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.

Price

DSC11S
Ducati Sport Classic half fairing - street
This is the replacement upper fairing for the Paul Smart/1000S. You can install it with the stock, short side fairings or with the long Paul Smart lowers listed below.

Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S. Will fit the other models ('06 Sport, GT and Biposto) with a Paul Smart/aftermarket front fairing bracket.

Price

DSC12
Ducati Sport Classic - Paul Smart long lower fairing - Right
These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.

You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.

Price

DSC13
Ducati Sport Classic - Paul Smart long lower fairing - Left
These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.

You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.

Price