 |
| 
|
Wow, do we have a lot of stuff for your
Honda CBR 600 F2. Twenty-three different parts including no less
than two conversion kits! Get your new skins today!
|
|
 2CBR61C
Honda CBR 600 F2 Competition upper fairing
This is identical to your Honda CBR 600 F2 upper faring with the
exception that the headlight holes have been filled in for competition
use, but can easily be cut out for street use... This is a great
fairing assembly for track riders, as you can take off your expensive
upper faring and save your headlights from any crash damage. If
you need an upper fairing for an Honda CBR 600 F2 we’ve
got what you need.
Price |
|
 2CBR62
Honda CBR 600 F2 Right lower fairing
This is a lightweight crash replacement for your Honda CBR 600
F2. Simply drill the mounting holes and attach it to your bike.
When you take it off and paint it no one will ever know the difference!
Freshen up that ratty beat up Honda CBR 600 F2 with one of our
new body panels today!
Price
|
|
 2CBR63
Honda CBR 600 F2 Left lower fairing
This is a lightweight crash replacement for your Honda CBR 600
F2. Simply drill the mounting holes and attach it to your bike.
When you take it off and paint it no one will ever know the difference!
Freshen up that ratty beat up Honda CBR 600 F2 with one of our
new body panels today!
Price |
|
2CBR61HRC
Honda CBR 600 F2 Competition upper fairing
This is the HRC version of the Honda CBR 600 F2 upper fairing.
Price |
|
CBR62HRC
Honda CBR 600 F2 Right lower fairing
This is the HRC version of the Honda CBR 600 F2 lower fairing.
Price
|
|
2CBR63HRC
Honda CBR 600 F2 Left lower fairing
This is the HRC version of the Honda CBR 600 F2 lower fairing.
Price |
|
 2CBR64
Honda CBR 600 F2 Right seat side fairing
Replace your crash damaged Honda CBR 600 F2 seat
side with our affordable lightweight panel. This is identical
in exterior shape and appearance. Fabrication of mounting tabs
will be needed to mount this panel onto your bike.
Price |
|
 2CBR65
Honda CBR 600 F2 Left seat side fairing
Replace your crash damaged Honda CBR 600 F2 seat side with our
affordable lightweight panel. This is identical in exterior shape
and appearance. Fabrication of mounting tabs will be needed to
mount this panel onto your bike.
Price |
|
 2CBR67
Honda CBR 600 F2 Tail light thing
This is our little piece that goes between your right and left
seat sides and above your tail light on the back of your Honda
CBR 600 F2. Simply drill the mounting holes, paint, and attach
it onto your motorcycle.
Price
|
|
 2CBR611
Honda CBR 600 F2 Solo seat cowl
This nifty little piece covers the passenger part of your seat
and makes your Honda CBR 600 F2 looks like it has a one-piece
race tail. There is a simple installation with Velcro.
Price |
|
 2CBR69S
Honda CBR 600 F2 Supersport race tail
Here is a real cool piece for your CBR 600 F2. We've taken the
right and left seat sides, the tail light area, and the solo seat
cowl and molded them into a one-piece race tail. Simply slide
your long upholstery inside this fiberglass panel and it hides
the passenger part of the seat. Then take the seat assembly and
slide that down your chassis, attach the mounts. Give your street
bike a custom race look with this super sport race tail. Get yours
today!
Price |
|
2CBR69W
Honda CBR 600 F2 Supersport race tail
This is the WERA race legal version of the 2CBR69S.
Price |
|
2CBR69B
Honda CBR 600 F2 Superbike race tail
This tail section is similar to the Super sport race tail with
the exception of that the seat pan area has been filled in for
this race padding. A lot of professional racers like this super
bike style seat because they can feel the rear suspension and
rear tire better, they also feel that the stock upholstery dampens
the effect and that they can get better handling out of there
chassis with this style of tail section. This seat works with
closed cell race foam, available through us.
Price |
|
2CBR69BS
Honda CBR 600 F2 Superbike race tail - short version
Like the 2CBR69B but ehm... shorter. This seat has a much lower
profile and will make your rear end look smaller. Ladies?
Price |
| 
|
MFP5
If you are the person with the highest standards on the
block, put this on your superbike seat.. These aerospace urethane
medium density pads are the ultimate for appearance, durability,
and comfort. They can either be glued on with weatherstrip adhesive
or attached with velcro. Specifically designed for the Honda CBR600
F2/F3 '91-'96 superbike tails.
Price |
|
 2CBR615
Honda CBR 600 F2 Undertail
Very cool under tail that cleans off the underneath of your tail
section. Simply hack out all of that stock black, plastic crap
that sticks below your body panels and mount our lightweight fiberglass
piece underneath there. Custom paint or color-match the rest of
your bodywork for a cool street look. One thing that you may notice
is that our under tail has a license plate bracket already molded
into it so there are no ugly brackets needed to mount your license
plate on it. This is a cool piece! Get yours today!
Price
|
|
 2CBR66
Honda CBR 600 F2 Front fender
Replace you busted front fender with our lightweight fiberglass
piece. Simply drill the mounting holes, paint, and attach it onto
your CBR 600 F2.
Price |
|
2CBR66M
Honda CBR 600 F2 Modified front fender
Replace you busted front fender with our lightweight fiberglass
piece. This is the modified fender, that is clearanced for expanding
front tires on race bikes. Simply drill the mounting holes, paint,
and attach it onto your CBR 600 F2.
Price |
|
 2CBR614
Honda CBR 600 F2 Rear swing arm fender
Replace your crash damaged or missing rear swing arm fender with
our lightweight fiberglass piece. Simply drill the mounting holes
and attach it onto the Honda CBR 600 F2 chassis.
Price |
|
 2CBR613
Honda CBR 600 F2 Fuel tank
Check out our lightweight racing gas
tank! This fiberglass tank is considerably lighter than the stock
tank. It shaves some weight off of the top and will make your
bike easier to flick from side to side, so it's a primo way to
improve the handling on your Honda CBR 600 F2.
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent! It is possible that the gas tank will rupture
and spill fuel possibly catching your motorcycle on fire if you
happen to crash on the street. This lightweight racing gas tank
is recommended for racing purposes only!
|
|
2CBR610
Honda CBR 600 F2 Number plate
This neat little piece replaces the headlight in the front fairing
for a race or a track day. Simply glue, or silicone, the inside
of your part to the inside of your upper fairing to fill in the
headlight area in order to apply numbers to the front. You can
also use this piece for a custom headlight installation in the
front of your Honda CBR 600 F2.
Price
|
| 
|
 4CBR6SJR
Smokin' Joe's body kit
This is the Airtech bodywork that Honda used on Miguel
Duhamel's Smokin' Joe's CBR 600 in the first half of the '90s.
Miguel went on to win no less than FIVE 600 Supersport Championships.
Nuff said...
Now you
have a chance to put this piece of racing history on your CBR
600 F2.
The Smokin'
Joe's two piece fairing assembly consists of a street legal main
upper with a single round headlight hole for that European endurance
look. The lower fairing is the same as most pros use, complete
with oil containment pan as most race organizations require. The
supersport tail uses the stock upholstery and the kit is completed
by a front fender. Get yours today!
Click here for more
info
Price
|
| 
|
CREA61K
Crea body kit
This is a complete body conversion kit for the '91-'94 CBR 600
F2. The kit contains main upper fairing, the lower belly pan,
the front fender, tail section, and a removable solo seat cowl.
This body kit bolts up to your CBR 600 using all your stock Honda
brackets and hardware. Please note that the Honda front main bracket
bends like butter so we strongly recommend replacing your bracket
with a new Honda piece.
Click here for more info
Price |