MAD MAX : GOOSE REPLICA

Build a Goose Replica from the iconic MAD MAX movie with our Goose replica fairing kit! We went through a tremendous amount of time and effort to produce the most accurate fairing kit and tail section available anywhere in the world!

If you've always wanted to build a Goose or Toecutter replica, you've come to the right place. Call us today and we'll make you what you need!!!

MM1
Mad Max Jim Goose / Toecutter Fairing - upper
The original upper fairing as used on both the Goose and Toecutter bike. We went to great lengths to ensure this fairing is accurate in all its details. Small inner dash lip for strength can be trimmed easily if you're installing a CB radio.

More pictures

Price

MM2
Mad Max Jim Goose / Toecutter Fairing - Lower
Matching lower to the MM1 Goose upper. Nice mounting flange for a tight seam with the upper.
The back lower edge of these fairings needs to be trimmed to match your foot controls and shoe size.
The Goose bike had rearsets and this setup requires minor trimming for clearance. If you're using stock KZ footpegs or have feet like a Sasquatch, you'll need to trim away more!

More pictures

Price

MM3
Mad Max Jim Goose Fairing - Tail section
The original Goose replica tail section, not just a botched cover. This tail section has a bonded underseat enclosure with integrated seat support bracket designed for the KZ900/KZ1000 frame. The underseat enclosure forms a storage compartment in the hump and has a flat rear surface to mount your taillight and/or license plate bracket.

Length: 32"
Width front: 7.5"
Widest point: 12.25"
Seat pan: 16"
Height: 9"


Price

MM3UP
Mad Max Jim Goose Fairing - Upholstery pan
This is the matching upholstery pan that will close the storage compartment and can be used as a base for your custom uypholstery. The recessed area locks into the opening in the tail. Usually installed with velcro.


Price

MM4
Mad Max Jim Goose - Solo seat cowl
If you don't want to cut the hinges off the frame, now you don't have to!
We've made this really cool solo seat cover that you can bolt straight to the seat pan, just like on (some of) the movie bikes - but a lot cleaner. So this seat cowl will flip up with the stock seat (tech note: make sure you have enough slack on the taillight wires!).

We put a nice flat surface underneat the rear lip for your taillight and sell a nice license plate bracket that bolts right to the rear frame mount.

The ribbed black upholstery is also available from us!

Check out our Australian customer, Rob Orchard's Z900 with our seat cowl below.

Price


MM5
Mad Max Amaroo Fairing - upper
Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area.

More pictures

Price

MM6
Mad Max Amaroo Fairing - Lower

Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area. No rearsets required to install this lower fairing.

More pictures

Price

BLADE 1
Toecutter front fender
The Goose bike used a standard steel front fender, but the Toecutter bike used this sharp looking "blade" style front fender, that has a flat rib over the top. Does not use the standard KZ fork mounts but attaches above it with zip ties or hose clamps.

Please note: You have two options to install these fenders on standard KZ forks (5" between dust seals):
1. You'll have to spread open the BLADE1 fork ears substantially or
2. You can trim the BLADE2 to the narrower overall shape of the BLADE1.
Choose whichever you're more comfortable with. Ask your sales rep if you have any questions!

Wheel size: 19"
Width: 4.25"

More photos

Price

BLADE2
Blade style front fender - wide
The Goose bike used a standard steel front fender, but the Toecutter bike used this sharp looking "blade" style front fender, that has a flat rib over the top. Does not use the standard KZ fork mounts but attaches above it with zip ties or hose clamps.

Please note: You have two options to install these fenders on standard KZ forks (5" between dust seals):
1. You'll have to spread open the BLADE1 fork ears substantially or
2. You can trim the BLADE2 to the narrower overall shape of the BLADE1.
Choose whichever you're more comfortable with. Ask your sales rep if you have any questions!

Wheel size: 19"
Width: 4.75"

More photos

Price

DUC91
Johnny the Boy Half fairing - 8" opening
This is the half fairing that was used on the Johnny the Boy bike. The chrome lens around the headlight lens will push through the opening.

Price

DUC917
Ducati 900 SS Half fairing - 7" opening
This is the same shape as DUC91 but with a return lip that butts up against the headlight lens so the headlight is recessed in the fairing.

Price

DUC74
Ducati 900 SS seat - GT wide line
This is the seat that was used on the Johnny the Boy bike.

Price

 

LPB1
License plate bracket
This is a super clean universal license plate bracket. Tuck it up underneath a tail section and bolt to the frame or custom mounting point. The top part of the bracket is slotted which makes this bracket very flexible in application as it allows mounting bolts to be between anywhere from .75 to 4.75" apart.

Slots and holes for 1/4" / 6mm fasteners.

Steel bracket, black powder coat.

Price

DRAG2 Drag bars 7/8" - chrome
Our classic drag bike handlebars, 7/8" version.

Width: 28"

Chrome finish.

Price

DRAG2B Drag bars 7/8" - black
Our classic drag bike handlebars, 7/8" version.

Width: 28"

Black finish.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #
Description
Price
MAD MAX JIM GOOSE MFP REPLICA
MM1 MAD MAX GOOSE FAIRING - UPPER $414.00
MM2 MAD MAX GOOSE FAIRING - LOWER $414.00
MM3 MAD MAX GOOSE TAIL SECTION W/ STORAGE COMPARTMENT $334.80
MM3UP MAD MAX GOOSE UPHOLSTERY PAN $70.80
MM4 MAD MAX GOOSE SOLO SEAT COVER WITH TAILLIGHT BRACKET $236.40
MM5 MAD MAX AMAROO FAIRING - UPPER $414.00
MM6 MAD MAX AMAROO FAIRING - LOWER $414.00
BLADE1 NARROW TOECUTTER FENDER - FRONT $99.59
BLADE2 WIDE TOECUTTER FENDER - FRONT $99.59
DUC91 JOHNNY THE BOY FAIRING - 8" OPENING $182.59
DUC917 JOHNNY THE BOY FAIRING - 7" OPENING $237.48
DUC74 JOHNNY THE BOY SEAT - 900SS STYLE $169.33
DRAG2 DRAG BARS 7/8" - CHROME $66.80
DRAG2B DRAG BARS 7/8" - BLACK $66.80
LPB1 LICENSE PLATE BRACKET $23.94

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices