PETRONAS FAIRINGS, SEATS, FUEL TANKS, FENDERS, AND PARTS

It's one of the most iconic and elusive bikes on the planet, with a backstory so muddied that few people will ever know the full truth behind the PETRONAS FP1's tale. Bikes that were supposedly This means that these bikes are extremely rare, but w e happened to get our hands on some bodywork to make molds from several iconic parts for you!

You have to admit.. the Petronas FP1 is a beautiful machine. You might not have one, but we at AirTech will do our darndest to make it look like you do!

Maybe you have a 3-cylinder Yamaha or Triumph (or maybe even a twin cylinder), pair it with thhis bodywork and you have an excellent disguise. Let your imagination run wild, and we'll help you out.

PFP11C
Petronas Upper Fairing
Basically, there was only ever one upper fairing made for all of the FP1's. The race version was similar to this style, but without any sort of lighting. The street version simply had two stacked projector lights hidden behind the windscreen. Making the potential for replication quite easy for a handy person like you. Street or race bike, we've got you covered!

Price

More photos

PFP12
Petronas FP1 Right Midsection
This part connects the upper fairing to the lower belly pan on the right side.

Price

PFP13
Petronas FP1 Left Midsection
This part connects the upper fairing to the belly pan on the left side.

Price

PFP14
Petronas FP1 Belly Pan
This is the bottom part of the fairing under the exhaust. It is completely filled in and dammed in the rear to comply with oil containment requirements

Price

More photos

PFP15
Petronas FP1 Rear Tail Cap
This tail cap is actually for the competition version of the FP1's. It differs from the street version, as it has cut outs on the top sides to allow hot air from the exhaust pipes to escape. This is just the top rear part that connects to the carbon lower subframe and covers the high mount exhaust pipes.

Price

More photos

PFP16
PetronasFP1 Front Fender
This fender was designed to fit the Ohlins forks that were stock on the street and race FP1's. It's a pretty cool shape and might fit other works with a bit of fab work.

Price

More photos

PFP17
Petronas FP1 Undertail Enclosure
All of the FP1's had a version of this part. This piece we offer was actually for the street version, as it has a little tab in the back to hang the license plate mount. The race version of this enclosure did not have such a tab, it was completely smooth.

Price

More photos

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #	Description	Price
LAVERDA
PFP11C	PETRONAS UPPER FAIRING	$315.36
PFP12	PETRONAS FP1 MIDSECTION - RIGHT	$247.97
PFP13	PETRONAS FP1 MIDSECTION - LEFT	$247.97
PFP14	PETRONAS FP1 BELLY PAN	$273.89
PFP15	PETRONAS FP1 REAR TAIL CAP SECTION	$262.08
PFP16	PETRONAS FP1 FRONT FENDER	$207.48
PFP17	PETRONAS FP1 UNDERTAIL ENCLOSURE	$190.88

To order call 760-598-3366 NOW!