GSXR 600 '91-'92 GSXR600 drag bike, fairing, fairings, tail, seat, front fender, rear hugger, upper, lower, bellypan, fuel tank, undertail

All Prices are listed at the bottom of the page

Remember the littlest American GSXR? Do you have one? If so, you'll be psyched to know we have all the bodywork you could possibly want for it - and even some extra goodies to trick the lil' bugger out.

We have a competition upper that has a smooth snout. If you need to, holes can easily be cut into the front to accommodate stock headlights and turn signals, or you can lighten the beast up and make it look trick with one or two halogen lights instead. We have the fairing lowers and a modified radiator guard that attaches to the lowers and stretches back to the radiator to prevent high pressure bleed off and improve cooling.

A couple of different seats are available. First, a supersport seat with the seat pan area open, which allows you to use the stock seat foam. The second option is a superbike type of tail section with a covered seat pan ready to accept closed cell foam so you can jettison the stock upholstery.

You may even be interested in using one of our Yoshimura water-cooled superbike tail sections, or our GSXR 600 superbike seats.

Confuse your riding pals; "That sure looks cool. What kind of bike is that again? The front fender is available, covers for the both sides of the carburetors, and a number plate for people who are track-bound with their stock fairings.

We know the little GSXR wasn't known for its light weight, so consider shaving off some poundage and slap on some Airtech bodywork. Hell make it out of carbon fiber and be the envy of your riding group. Call us. Now!

GSXR61C
Suzuki GSXR 600 Competition upper fairing
This is identical in exterior shape to the stock GSXR upper fairing with the exception that the headlight holes have been filled in for race purposes. Save your stock headlight and upper fairing and get one of these lightweight uppers for track days.
For street use, it is a simple matter of cutting out holes in the upper for either the stock headlight unit and turn signals or some trick custom headlights.

GSXR62
Suzuki GSXR 600 Lower fairing - right
Replace your crash damaged right lower with one of our lightweight fiberglass pieces, which has considerable weight savings over the stock plastic piece. Simply drill at the mounting points, mount it onto your chassis and go riding again.

GSXR63
Suzuki GSXR 600 Lower fairing - left
Replace your crash damaged left lower with one of our lightweight fiberglass pieces, which has considerable weight savings over the stock plastic piece. Simply drill at the mounting points, mount it onto your chassis and go riding again.

GSXR64
Suzuki GSXR 600 Supersport seat
Our most popular race tail for the GSXR 600s. This tail is right and left seat sides, the solo seat cowl, and tail light area all molded into a one-piece unit. This solo seat uses the stock Suzuki upholstery and covers the passenger provision. Installation is a breeze, drill the mounting holes and mount the seat onto your chassis. The taillight is easily cut open for street use. Get yours today!

GSXR64B
Suzuki GSXR 600 Superbike seat
Same exterior shape as the GSXR64 Supersport seat, but the seatpan area is filled in to be used with closed-cell foam padding, also available from us.

Comes with support bracket.

GSXR64BT
Suzuki GSXR 600 Superbike seat - tall
This seat has a raised seatpan area for taller riders. The longer distance between the footpegs and seat area helps prevent leg cramps.

Comes with support bracket.

5GSXR01S
Suzuki GSXR 600 Superbike seat '01 style - kit
This superbike seat is styled after the '01 GSXR. Update your trusty old gixxer with one of these fresh looking tails and you be stylin'....

This kit comes complete with the following:
- tail
- seat foam
- taillight
- support bracket
- undertail with license plate lip and taillight mount..

The taillight opening is cutout in the back of the tail.
The support bracket needs to be mounted underneath the seatpan to support the rider weight. Loosely fit the tail on the bike with the support bracket sitting on the frame rails. Now reach in from below and move the bracket around to get it in the proper position. You can either leave it loose or, better, attach it to the bottom of the seat with silicone caulking.

GSXR65
Suzuki GSXR 600 Front fender
Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.

5GSXR75HL
Suzuki GSXR 600 Front fender w/ light
Ever seen one of these? This endurance-inspired front fender will put some extra candles on the road and a smile on your face!

GSXR69
Suzuki GSXR 600 Carb cover - right
Replacement carb cover.

GSXR610
Suzuki GSXR 600 Carb cover - left
Replacement carb cover.

GSXR68
Suzuki GSXR 600 Radiator guard
Replacement radiator guard.

GSXR68B
Suzuki GSXR 600 Radiator guard
This is a modified radiator guard that joins the left and right lowers and extends back to the radiator to combat high pressure bleed off and boost cooling efficiency.

YWCSBAB
Suzuki GSXR 600 '92-'93 Yoshimura airbox
Works with:
'92-'93 GSXR 600 stock upper fairing GSXR61C

These ducts were pop riveted into the stock uppers.
The airbox can also be used with YWCSB1 Yoshimura race upper, which comes with it's own ducts.

We have 2" smooth bore duct hose available separately, click here.

Please note: This is a race air box and does not clear starter/alternator on a street bike.

This airbox comes with intake ducts that will work with the stock street upper or our competition upper GSXR61C. You'll be cutting out some big square holes on the left and right side of the fairing to fit these big air intakes. You can install the intake ducts with 5-minute epoxy, silicone or rivets. Don't forget to order some smoothbore duct hose as well!

Works with Mikunis, tight on Keihins. On a street bike, you will have to cut the bottom out of this airbox to work with the starter and the alternator (in a street application, the box won't pressurize, you will just be routing cool air to the carbs).

RGV REPLICA BODY KIT

Always dreamed of owning a GP bike? How about turning your trusty 'ole Gixxer into a Revvin' Kevin Schwantz RGV replica, you know, the Lucky Strike bike?

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Price
SUZUKI GSXR 600 '92-'93
GSXR61C	SUZUKI GSXR 600 UPPER FAIRING - COMPETITION	$197.14
GSXR62	SUZUKI GSXR 600 LOWER FAIRING - RIGHT	$210.88
GSXR63	SUZUKI GSXR 600 LOWER FAIRING - LEFT	$210.88
GSXR64	SUZUKI GSXR 600 TAIL SECION - SUPERSPORT	$249.08
GSXR64B	SUZUKI GSXR 600 TAIL SECTION - SUPERBIKE	$249.08
GSXR64BT	SUZUKI GSXR 600 TAIL SECTION - SUPERBIKE - TALL	$249.08
5GSXR01S	SUZUKI GSXR 600 TAIL SECTION - SUPERSPORT '01 STYLE SEAT KIT	$400.38
GSXR65	SUZUKI GSXR 600 FENDER - FRONT	$88.90
5GSXR75HL	SUZUKI GSXR 600 FENDER - FRONT WITH LIGHT	$124.50
GSXR68	SUZUKI GSXR 600 RADIATOR GUARD	$73.24
GSXR68B	SUZUKI GSXR 600 RADIATOR GUARD - (WIDE FLANGES)	$100.74
GSXR69	SUZUKI GSXR 600 CARB COVER - RIGHT	$73.24
GSXR610	SUZUKI GSXR 600 CARB COVER - LEFT	$73.24
YWCSBAB	SUZUKI GSXR 600 YOSHIMURA RACE AIR BOX	$605.84
RGV REPLICA BODY KIT
RGVRK	"RGV REPLICA" COMPLETE STREET KIT	$1432.80
RGVRSK	"RGV REPLICA" TAIL SECTION	$480.46

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices