
|
Just
call us the GSXR Fairings Warehouse! Whether you're looking for
a GSXR race or street fairing, race tail, undertail, fender or
stock replacement lowers, Airtech's got what you need! |
 |
7GSXR7SS1
Suzuki GSXR 600 Super sport race upper fairing
What we have here is the upper fairing to our two-piece race fairing
assembly. This piece is the upper headlight area with the headlight
holes filled in and half of the right and left lowers and the
radiator shroud all molded as a one-piece unit. This fairing splits
with the upper and lower down about the base gasket of the cylinder
of the bike down halfway threw the side. This allows you to remove
the fairing assemblies on and off the bike very quickly and easily
also allowing a smooth clean design because you don't any parting
seams up by the handlebars or around all of the radiator shrouding.
This piece only works with our 7GSXR7SS2
lower.
Price
|
 |
7GSXR7SS2
Suzuki GSXR 600 Super sport race lower fairing
This is the bottom half to our two-piece super sport race fairing
assembly. This piece is the bottom right and left lowers, the
front radiator shrouding, and the oil containment belly pan all
molded as a one-piece unit. This fairing is cut open on the left
hand side for your generators and does have a side stand provision.
This piece only works with
our 7GSXR7SS1 upper fairing.
Price |

|
7GSXR71C
Suzuki GSXR 600 Competition upper fairing
This is a very popular piece with track day riders because they
can take off there stock upper fairing and headlight assembly
and save there expensive pieces incase of a crash. This piece
allows you to keep all your stock right and left side panels and
only having to paint a small upper fairing for track day bikes.
This piece is also popular with custom bike people for the same
reason, all you have to do is replace the top fairing, do there
own custom headlight cut outs and shapes, and paint the upper
fairing and not have to paint the stock panels. Get yours today!
Price |

|
7GSXR71S
Suzuki GSXR 600 Street upper fairing Replace your crash
damaged upper fairing with our lightweight fiberglass piece. Simply
replace all of your bent and broken pieces, drill the mounting
holes on our fiberglass piece, remount your chassis and your riding
again.
Please not that we do not
to the inside tab work for the headlight mounts on the inside
of this fairing because they're not needed.
The headlight assembly actually mounts into the metal fairing
bracket, which supports the heavy weight of the headlight assembly.
Once you mount your headlight onto the bracket our fairing assembly
holds the headlight assembly attach the fairing at the mirror
mounts up at the top attach the fairing to the right and left
sides of the lowers and the fairing is secure and stable at over
one hundred miles per hour. If you have any questions about mounting
this fairing before you purchase it give our tech reps a call
they will be happy to discuss the details with you.
Price |

|
7GSXR72
Suzuki GSXR 600 Right lower fairing
Replace your crash damaged right lower with one of our
lightweight fiberglass pieces, which has considerable weight savings
over the stock plastic piece. Simply drill at the mounting points,
mount it onto your chassis and go riding again. A little fabrication
is required down at the bottom to attach your lower radiator shroud
behind the tire but a crafty person can do that in a few minuets
and same themselves hundreds of dollars over the stock plastic
pieces. Save some weight off your bike, put some money in your
pocket and get one of these Air-Tech fiberglass pieces today.
Price |

|
7GSXR73
Suzuki GSXR 600
Left lower fairing
Replace your crash damaged left lower with one of our lightweight
fiberglass pieces, which has considerable weight savings over
the stock plastic piece. Simply drill at the mounting points,
mount it onto your chassis and go riding again. A little fabrication
is required down at the bottom to attach your lower radiator shroud
behind the tire but a crafty person can do that in a few minuets
and same themselves hundreds of dollars over the stock plastic
pieces. Save some weight off your bike, put some money in your
pocket and get one of these Air-Tech fiberglass pieces today.
Price |

|
7GSXR74B
Suzuki GSXR 600 Super bike tail
What we have here is one of our one-piece race tails. We've taken
the right and left seat sides, the solo seat cowl area, and the
tail light area and molded it into a one-piece unit. We call this
tail light super bike tail because the seat pan area where the
rider sits is filled in and flat and uses close cell race padding
instead of the stock upholstery. We offer a bracket assembly that
mounts to the chassis that supports the riders weight so that
the fiberglass tail section doesn't brake; this part number is
7GSXR74SB for the seat bracket assembly. This is a race legal
tail section for most racing organizations and is a cool tail
section for custom street bikes. Get one today!
Price |

|
7GSXR74S
Suzuki GSXR 600 Super sport tail
Our most popular race tail for the GSXR600's. This tail is right
and left seat sides, the solo seat cowl, and tail light area all
molded as a one-piece unit. The seat pan area, where the rider
sits, is open to use with the stock Suzuki upholstery. This is
an easy instillation, drill four mounting holes and mount onto
your chassis. This is a race legal tail section for most racing
organizations and is also a cool custom street bike tail section,
the taillight is easily cut open for street use. Get yours today!
Price |

|
7GSXR74S4
Suzuki GSXR 600 Super sport tail Stretched +4, this tail
section is like our 7GSXR74S but only four inches longer. Use
your stock upholstery or one of our drag bike seat pans.
Price
|

|
7GSXR74S6
Suzuki GSXR 600 Super sport tail Stretched +6: same tail
as our 7GSXR74S but stretched six inches longer than stock. Use
your stock upholstery or one of our drag bike street pans.
Price
|

|
7GSXR74SB
Suzuki GSXR 600 Seat Bracket
Use this seat bracket to support the riders weight when using
our 7GSXR74B Super bike race tail. You will need to drill some
mounting holes near subsection to mount this bracket. We've seen
people put rib nuts in the frame, use self-tapping screws, and
some people will even popper this into the frame. This is a quick
and easy installation.
Price
|

|
7GSXR74BB
Suzuki GSXR 600 Battery box
Small battery box that will fit between the subframe rails on
a custom race bike where the stock battery box and all teh attached
crap has been removed. Perfect for use witha modern lithium ion
battery.
Please
note: bottom side up in the picture, in case you were
wondering...
Price
|

|
7GSXR75
Suzuki GSXR 600 Front fender
Direct replacement for the 7GSXR front fender. Just drill the
mounting holes, take off your heavy plastic piece, and install
our lightweight fiberglass fender. This fender is lighter than
stock so your suspension reacts faster. This fiberglass fender
is also available in carbon fiber. Ask one of our sales reps today.
Price
|

|
7GSXR79
Suzuki GSXR 600 Under seat enclosure Street
Hack out all that ugly plastic crap underneath your tail section
and install one of our cool fiberglass under seat enclosures.
This piece uses your stock DOT approved tail light assembly so
you don't have to worry about someone slamming into the rear end
of you like it happens with those guys using those dim LED lights.
Those pieces are pretty unsafe; ours uses the stock DOT taillight.
Our piece also has a license plate bracket molded into it so you
don't have to fabricate or bend any pieces of metal like our competitors
under seat enclosures. Simply hack out your black plastic pieces,
little bit of cutting and trimming, and custom paint this under
seat enclosure for an awesome custom street bike.
Price
|

|
7GSXR79R
Suzuki GSXR 600 Under seat enclosure race
Remove all that heavy black plastic under seat rear fender assembly
and lighten up the back of your race bike. This race piece attaches
inside of our super sport or super bike race tail and cleans off
the inside bottom of your race bike. This is a must have to finish
off the underside of your race bike.
Price
|

|
7GSXR711
Suzuki GSXR 600
Fuel Tank
Here is a lightweight racing fuel tank for your GSXR. Yes, we
mean lightweight. Go ahead and take your stock tank off your bike
and weigh it, it weighs about thirteen pounds, our lightweight
fiberglass fuel tank weighs about four and a half pounds. That's
a tremendous weight saving off the top of your motorcycle. Your
bike will handle a lot better, it will flick from right to left
hand sides and turn into corners a lot faster without that extra
ten pounds of weight on top of your motorcycle. This bike is identical
in dimensions to the stock fuel tank. The fuel tank mounts to
your stock rear-mounting bracket. This race tank comes with a
lightweight racing gas cap and has an aluminum bung in the bottom
of the tank to use with your stock fuel pumps. You can also add
additional bungs in the bottom for nitrous or turbo systems. Just
ask our sales reps about additional details. Tank comes with internal
venting system. Save a ton of weight off of your bike and be able
to increase the handling in your motorcycle by getting one of
these fuel tanks today!
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more...
|

|
7GSXR711S
Suzuki GSXR 600 Slammed fuel tank
This is an awesome racing gas tank for your GSXR. Not only is
this gas tank nine pounds lighter than your stock fuel tank but
this gas tank is slammed and smaller. What we mean by that is
that this gas tank is two inches lower in the rear, that part
that digs into your stomach, it is two inches lower in the back
and the gas tank is actually two inches narrower so you can hold
onto the bike at your crotch better and your elbows aren't restricted
when you're hanging off the side of the motorcycle. Drag racers
love this gas tank because it allows them to slide forward and
stay over the top of the tank. Road racers love this tank because
it allows them to move around the motorcycle more freely than
the stock fuel tank does. You will love this gas tank. This gas
tank has aluminum mounting plate in the back to use with your
stock mounting brackets and has another aluminum plate to use
with your stock fuel bung. This tank comes with a custom trick
racing gas cap. Tank has internal venting. Other options include
carbon fiber or additional bungs for nitrous or turbo. Whether
you are drag racing or road racing your GSXR you need this gas
tank. Purchase yours today!
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more...
|
 |
GL30A
Suzuki GSXR 600
Grey line fairing set
This fairing set is extremely popular with our racers and also
with the custom street guys because they can save themselves
a lot of money. This four-piece set is everything you need for
a paint set on your race bike or custom street bike. This set
includes our super sport race upper fairing, super sport race
lower fairing with oil containment, and this kit only comes
with our super sport race tail section as well as a front fender.
If you want to get yourself some great glass and save yourself
some money for beer, this is the set for you. Call our sales
reps today.
Price
|