GSXR 750 '91-'92

All Prices are listed at the bottom of the page

 

How many ways are there to skin a Suzuki, young Grasshopper? Let us count the ways using a '91-'92 GSXR 750 as our guinea pig.

We could use the straight competition upper fairing on the race track or cut the headlight area out for street use. My son, we could even replace the stock headlights and turn signals with lightweight halogen projector beam lights and slick turn signal pods.

Ofcourse we cannot forget the left and right center sections or the one piece belly pan that attaches underneath them. Or perhaps the fast-folk of the racetrack might want to use Airtech's special whole side panels, which can detach quickly either right side or left. Who needs a separate belly pan anyway?

There are a plethora of tail sections to choose from. There's a stock-appearing one piece tail section, a Yoshimura replica seat, a Yoshimura F1 seat, and a Yosh water-cooled model style seat.

We might want to use the inverted fork front fender or rear swing arm fender. Advanced skinners might want to take advantage of the pressurized air box or the lightweight sprint fuel tank.

4GSXR71C
Suzuki GSXR 750 Competition upper fairing
This is identical in exterior shape to the stock GSXR upper fairing with the exception that the headlight holes have been filled in for race purposes. Save your stock headlight and upper fairing and get one of these lightweight uppers for track days.
For street use, it is a simple matter of cutting out holes for thw stock headlights or some trick custom headlights.

Price

3GSXR72
Suzuki GSXR 750 Right Mid

This is a direct replacement panel for the right mid side of your GSXR.

Price

3GSXR73
Suzuki GSXR 750 Left Mid

This is a direct replacement panel for the GSXR left side mid panel.

Price

2GSXR74
Suzuki GSXR 750 Lower fairing

This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.

Price

2GSXR74YR
Suzuki GSXR 750 Yoshimura Lower fairing

This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.

Requires trimming around the kickstand for use on a street bike.

Price

4GSXR72L
Suzuki GSXR 750 Long lower fairing - right
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.

Price

4GSXR73L
Suzuki GSXR 750 Long lower fairing - left

This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.

Price

4GSXR75
Suzuki GSXR 750 Supersport race tail

This is a cool one-piece race tail for your GSXR. The taillight is molded in and would have to be cut out for street use. Works with the stock GSXR 750 upholstery.

Price

4GSXR76
Suzuki GSXR 750 Front fender

Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.

Price

5GSXR75HL
Suzuki GSXR 750 Front fender w/ light

Ever seen one of these? This endurance-inspired front fender will put some extra candles on the road and a smile on your face!

Price

3GSXR77
Suzuki GSXR 750 Rear fender

Replacement for the busted stock rear fender. This rear hugger mounts to one vertical tab and 3 inserts.

Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has four vertical metal tabs on the swingarm, use 88-89 rear fender 2GSXR77.

Price

AT26M
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for aftermarket overbraced 1st and 2nd gen GSXR750 swingarms like SPF where the brace runs parallel to the arm.

Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean.

Inside width 9"
Outside width 11.75"
Fender length 13"
Depth 6.5"

Price

4GSXR78
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.

Price

4GSXR710
Suzuki GSXR 1100 Undertail

Look at that cool undertail. It will clean up the bottom of your tail tremendously.

Price

4GSXR79
Suzuki GSXR 750 windscreen air ducts
Another rare item form the Yosh collection... See the teardrop shaped air intake ducts next to the winscreen? That's what these are. They hook up to the custom, aluminum Yoshimura tank that you see in the picture, with smoothbore hose. The motor had a heatshield that came up from the back over the tranny, past the carbs en forward over the motor. These ducts supply cool clean air to this carburetor area. This was teh last stage of development before actual pressurized airboxes were used.

You cut holes in the windscreen and screw these ducts on with windscreen screws.

These do not work with a stock tank or our Yosh Sprint tank below. You will have to have a custom tank fabricated with ducts going through it.

Outlet OD 1.75"

More photos

Price

2GSXR710
Suzuki GSXR 750 Yoshimura carb covers

These carb covers are almost impossible to find, but we have them.

These covers are easily installed onto your chassis with zip ties (recommended) but we've seen velcro used too.

Price

2GSXR711
Suzuki GSXR 750 Yoshimura dry clutch duct
Another hard to find Yosh part! This is the small Yoshimura dry clutch naca duct that routes cool air to the dry clutch - or standard clutch for that matter. Cut a small hole in your stock or race fairing and rivet this little piece in. Only available from Airtech!

More photos

Price

2GSXRST
Suzuki GSXR 750 Fuel tank - Sprint

This is a slammed style race fuel tank for you GSXR. You can save quite a few pounds off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

YOSHIMURA F1

Did you know we designed all the Yosh stuff in the early to mid-nineties? They fit your 750! Click here to see the Yosh F1.

 

RGV REPLICA BODY KIT

Always dreamed of owning a GP bike? How about turning your trusty 'ole Gixxer into a Revvin' Kevin Schwantz / Lucky Strike RGV replica? We make it easy!

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #
Description
Price
SUZUKI GSXR 750 '91-'92
4GSXR71C SUZUKI GSXR 750 UPPER FAIRING - COMPETITION $210.00
3GSXR72 SUZUKI GSXR 750 CENTER SIDE FAIRING - RIGHT $129.33
3GSXR73 SUZUKI GSXR 750 CENTER SIDE FAIRING - LEFT $129.33
2GSXR74 SUZUKI GSXR 750 LOWER FAIRING - ONE PIECE $240.67
2GSXR74YR SUZUKI GSXR 750 LOWER FAIRING - YOSH REPLICA $273.89
4GSXR72L SUZUKI GSXR 750 LOWER FAIRING - LONG 1 PIECE - RIGHT $190.88
4GSXR73L SUZUKI GSXR 750 LOWER FAIRING - LONG 1 PIECE - LEFT $190.88
4GSXR75 SUZUKI GSXR 750 TAIL SECTION - SUPERSPORT $247.97
4GSXR76 SUZUKI GSXR 750 FENDER - FRONT $99.59
5GSXR75HL SUZUKI GSXR 750 FENDER - FRONT WITH LIGHT $124.50
3GSXR77 SUZUKI GSXR 750 FENDER - REAR SWING ARM $99.59
AT26M SUZUKI GSXR 750 FENDER - REAR SWING ARM OVER BRACED $99.59
4GSXR78 SUZUKI GSXR 750 NUMBER PLATE $42.00
4GSXR79 SUZUKI GSXR 750 YOSHIMURA WINDSCREEN AIR DUCTS $98.69
4GSXR710 SUZUKI GSXR 750 UNDER SEAT ENCLOSURE $190.90
2GSXR710 SUZUKI GSXR 750 YOSHIMURA CARB COVERS $99.59
2GSXR711 SUZUKI GSXR 750 DRY CLUTCH DUCT $58.09
2GSXRST SUZUKI GSXR 750 FUEL TANK - SPRINT $825.16
RGV REPLICA BODY KIT
RGVRK "RGV REPLICA" COMPLETE STREET KIT $1432.80
RGVRSK "RGV REPLICA" TAIL SECTION $480.46

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices