OCP1
Vintage race belly pan / oil containment -
4-cyl.

This universal belly pan will fit most large 4 cylinder 70s/80s Japanese motorcycles with 4-1 exhaust. It will hold a few quarts of oil per AHRMA/WERA requirements. Originally designed for Kawasaki Z1. Trimming around exhaust and kickstand is usually required.

Measurements:
Overall length: 26.5"
Inside length between f/r dams: 22"
Width front: 11.5"
Width back: 10.25"
Depth (center): 4.5"

Application:
Universal, inline fours. Z1, KZ1000, GPZ750, GS750, GS1000, CB750 etc.

More measurements

More photos

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

OCP1L
Vintage race belly pan / oil containment -
4-cyl - Long
Identical to OCP1 except 2" longer.

Measurements:
Overall length: 28.5"
Inside length between f/r dams: 24"
Width front: 11.5"
Width back: 10.25"
Depth (center): 4.5"

More photos

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

OCP1S
Vintage race belly pan / oil containment - 4-cyl. - Short
Identical to OCP1 except 2" shorter.

Measurements:
Overall length: 24.75
Inside length between f/r dams: 20"
Width front: 11.5"
Width back: 10.25"
Depth (center): 4.5"

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

OCP2
Vintage race belly pan / oil containment -
2-cyl
This universal belly pan was originally designed for the Honda SL350 shown here, fitted with a 2-1 exhaust system. Will fit many small twins with similar exhaust system and can be modified for others. Trimming around exhaust and kickstand is required.

Measurements:
Overall length: 26.75"
Inside length between f/r dams: 22"
Width front: 7"
Width back: 11.25"
Depth (center): 4.5"

More photos

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

Vintage oil containment belly pan OCP2 mounted on a Honda CB350 with 2-1 exhaust.

OCP3
Vintage race belly pan / oil containment -
2-cyl
This universal belly pan works great on vertical twins like Triumph, BSA and XS650 or other race bikes where a shallow oil containment belly pan is required, usually with the exhausts running outside of the frame and this belly pan mounted inside the exhausts.
The rear dam is included but not bonded in, so you can adjust it forward/rearward to suit your bike and motor and then glue it in place. You can install it with fiberglass, 5 minute epoxy or silicone caulking.

Measurements:
Overall length: 24.5"
Width front: 8.5"
Widest point: 10.25"
Width back: 9""
Depth (center): 2.5"

More photos

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

CB350OCP
Honda CB350 Oil containment pan
We made this oil pan for a CB350 or 450 a long time ago. Attach it to your frame with a few simple brackets and you're off! Can be trimmed to fit various other bikes with pipes that run along the frame rails. Looks a lot cleaner than the 'ole turkey baster...

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

3DUC9OCP
Ducati aircooled 900 race belly pan with oil containment
This cool race belly pan will fit all air cooled 2-valve 750/900 Ducati motors (and possibly other V-twins with similar configuration) and hold a few quarts of oil in event of a spill.

Perfect for racing or track days! Some trimming and fabrication of a few simple brackets required. Also available in carbon fiber, ask your sales rep for pricing!

Measurements:
Overall length: 25"
Width front: 9"
Widest point: 9.5"
Width back: 9""
Depth (center): 2" min - 7" max

More photos

Recommended for installation:
4 Rubber cushion loop clamps
4Flush head fasteners
Heat shield

Price

HEAT1
This is the same bad ass stuff we use on our 299mph streamliner and our race bikes. Heat reflective aluminum surface with lightweight fiberglass backing. You can install this on the backside of any of our panels. Simply cut into the desired shape and install with 3M spray adhesive or epoxy. Excellent for use in race belly pans, tail sections with underseat exhausts, fuel tank bottoms (keeps fuel cooler) or anywhere else you require heat barrier.

24"x12"

Price